Bug Reports

• step per units

  42 views 1 comment 0 points Most recent by Repetier December 2016
• 80.2 Will not connect to Wifi

  60 views 6 comments 0 points Most recent by maralb December 2016
• Auto update fails

  134 views 8 comments 0 points Most recent by so_what December 2016
• Preparing Print Bug

  32 views 1 comment 0 points Most recent by Repetier December 2016
• [0.80] Lost access to touchscreen interface - "page can only be called over localhost"

  121 views 12 comments 0 points Most recent by shaiss December 2016
• 0.80 Z distance continue

  67 views 5 comments 0 points Most recent by Repetier December 2016
• Double print on server

  39 views 1 comment 0 points Most recent by Repetier November 2016
• Print and temperature freeze stuck in a loop

  143 views 12 comments 0 points Most recent by Repetier November 2016
• "Exception during socket read:Too many items in the combo box"

  62 views 2 comments 0 points Most recent by Repetier November 2016
• Alternative Server: Server is not reachable

  50 views 2 comments 0 points Most recent by googliola November 2016
• 0.80.1 Touchscreen interface only sees default G-code directory

  41 views 3 comments 0 points Most recent by Repetier November 2016
• Image V4

  47 views 2 comments 0 points Most recent by Repetier November 2016
• Connection problem after upgrading 0.80.0

  121 views 6 comments 0 points Most recent by Repetier November 2016
• [0.80 PRO] Showing wrong print job details in 2-printer setup

  54 views 4 comments 0 points Most recent by Repetier October 2016
• [0.80.0] Can't connect to any of my Printer after Upgrade

  175 views 12 comments 0 points Most recent by ebrithil October 2016
• No printers defined on 80 touch screen interface

  65 views 4 comments 0 points Most recent by Repetier October 2016
• 0.80 pause between layers

  41 views 1 comment 0 points Most recent by Repetier October 2016
• 0.80 Printer commands not exe

  36 views 1 comment 0 points Most recent by Repetier October 2016
• [0.80] Minor display glitch in Change Filament Screen

  51 views 2 comments 0 points Most recent by StephanK October 2016
• sd card print failed

  73 views 8 comments 0 points Most recent by jeff September 2016
• [0.75.1] Extra movement past 0 allowed

  64 views 3 comments 0 points Most recent by FloPiep September 2016
• Fail to fill buffer

  758 views 8 comments 0 points Most recent by Repetier September 2016
• Application crashed

  50 views 1 comment 0 points Most recent by Repetier August 2016
• Default Power on value

  47 views 2 comments 0 points Most recent by Taxus812 August 2016
• Run on Pause Not the Same as Filament Sensor Pause

  74 views 0 comments 0 points Started by lboucher July 2016
• Render window only displays positive quadrant of model.

  53 views 2 comments 0 points Most recent by davidmb213 July 2016
• Accessing repetier-server through ngrok

  109 views 1 comment 0 points Most recent by Repetier July 2016
• Installing 0.75 error

  560 views 29 comments 0 points Most recent by Repetier June 2016
• Repetier-server doesn't connect with Velleman K8200

  957 views 8 comments 0 points Most recent by robindegen June 2016
• [0.75.1] Invalid strings being sent for LCD messaging

  99 views 1 comment 0 points Most recent by Repetier June 2016