Bug Reports

• * DANGEROUS * Laser turns ON while homing

  113 views 1 comment 0 points Most recent by Repetier April 2016
• Skipping first 4 lines of print HELP

  118 views 5 comments 0 points Most recent by robgs March 2016
• RAMPS + Full Graphic Controller: Missing entries unless using print cooling fan

  93 views 0 comments 0 points Started by docpayce March 2016
• Random firmware resets

  131 views 2 comments 0 points Most recent by R_Klauco March 2016
• Custom table R1 resistor value

  70 views 0 comments 0 points Started by fra87 March 2016
• Retraction / reverse extrusion not working

  921 views 13 comments 0 points Most recent by AleXileD March 2016
• Z-lift on deltas (and retraction)

  217 views 3 comments 0 points Most recent by Parkush March 2016
• Mircostep mode change not applying

  165 views 1 comment 0 points Most recent by Intechgreater February 2016
• [0.92.8, Delta] G33 moves to forbidden x/y coordinates with high number of correction points

  178 views 7 comments 0 points Most recent by Repetier February 2016
• 0.92.8 G31 state don't change

  299 views 8 comments 0 points Most recent by Repetier February 2016
• 0.92.8 Z-probe hits the bed with G32 command (Github 2 Feb 2016 dev version)

  186 views 3 comments 0 points Most recent by Repetier February 2016
• .92.8 Crashes hard

  112 views 3 comments 0 points Most recent by Repetier January 2016
• Z speed limits ignored

  2.2K views 7 comments 0 points Most recent by bullar January 2016
• Bluetooth Problem with V0.92.8 on Ramps 1.4 with JY-MCU modul

  656 views 4 comments 0 points Most recent by Blamer January 2016
• Bed Thermistor 92_8

  180 views 6 comments 0 points Most recent by Miken January 2016
• [0.92.8, Delta] ENDSTOP_(X|Y|Z)_BACK_MOVE reduces Z_MAX_LENGTH

  192 views 2 comments 0 points Most recent by docpayce January 2016
• [0.92.7] Compile error: 'currentPositionSteps' in 'class Printer' does not name a type :(

  168 views 3 comments 0 points Most recent by docpayce January 2016
• COMPILE ERROR: 'fanKickstart' was not declared in this scope, HAL.cpp:1134

  198 views 3 comments 0 points Most recent by wfcook January 2016
• Wizard menu and SD card insertion

  127 views 3 comments 0 points Most recent by Repetier December 2015
• Extruder stops extruding

  4K views 95 comments 0 points Most recent by bredo December 2015
• Laser driver don't work with arc paths and only blinks

  215 views 4 comments 0 points Most recent by jellehak November 2015
• Ultimaker 1.5.7 with LCD RepRapDiscount Smart Controller Error

  303 views 0 comments 0 points Started by staxjp November 2015
• Wait retract distance- 0.92.5

  254 views 2 comments 0 points Most recent by mikkk November 2015
• Babystepping - bord freezes .92.6

  116 views 4 comments 0 points Most recent by Jetiman November 2015
• SD print stopped by user

  217 views 12 comments 0 points Most recent by bredo November 2015
• Rotary encoder jumps >100 steps in opposite direction during Z-babystep use

  815 views 8 comments 0 points Most recent by AlterEgo November 2015
• Firmware compiler error RETRACTION_UNDO_EXTRA_LENGTH

  160 views 2 comments 0 points Most recent by svake October 2015
• Error:Z-probe failed

  714 views 2 comments 0 points Most recent by UniversalRemonster October 2015
• Error Compilation - 0.92.5 - Disabled Languages

  157 views 1 comment 0 points Most recent by Repetier October 2015
• Error compilation "invalid digit "8" in octal constant"

  615 views 1 comment 0 points Most recent by Repetier September 2015