Festivejelly
About
- Username
- Festivejelly
- Joined
- Visits
- 42
- Last Active
- Roles
- Member
Comments
-
Thanks for the fast response! Appreciate it. Sorry for being crabby, I was stressing out about my orders. Still love repetier though! Will eagerly await 1.4.3
-
Note to future self and others. To downgrade SSH to the pi, Then run the following to get the old version: wget --no-check-certificate https://download3.repetier.com/files/server/debian-armel/Repetier-Server-1.3.0-Linux.deb Now run the following to…
-
Im going to roll back until I can fix this on a sandbox. If I ssh into the pi can I just install version 1.0.3 over the last one? How can I do that what commands do I need? Im a pro licence holder btw.
-
Bah seems the forum doesnt respect line endings... either way thats basically whats happening. Nothing has changed from my end other than simply clicking update on the server. Might I suggest a rollback function on the sever. The last thing I want t…
-
Send:14:41:39.542: N13 M75 CE5_16g_Mag_v3_9 Sunlu PLA 109g lw 0.4mm lh 0.28mm flow 100% if 40% ext1 215.0C bed 55.0C Recv:14:41:39.552: Error:No Checksum with line number, Last Line: 12 Recv:14:41:39.554: Resend: 13 Recv:14:41:39.574: Waiting for…
-
I simply updated the server version through the UI. I can send commands fine such has heating the bed or moving around the printer etc. But when I try to print a file I just keep getting connect and disconnect spam. 1 machine is running skr 1.4, 1 …
-
I have now updated and the problem I got was that it was trying to cold extrude. I narrowed the issues down to the USB or maybe the screen on my machine contacting the enclosure of the printer and causing some sort of disruption in the communication…
-
Got more issues with this, I think because of communication issues it doesnt get the correct message so sets the temp to max on both which ruins the print. PLA does not like 285 max and 110c max. I kinda feel like there should be some validation of…
-
I have the pro version so thanks for the heads up ill give that a shot.
-
The key point is that the server seems to be sending this command? Send:1:47:42.567: N14760 M104 S285 T0 I dont understand why the server would be doing that all of a sudden.
-
This happened again and caused the printer to go to max temps one more I have enabled logging and this is the output Recv:1:47:35.466: T:215.00 /215.00 B:65.77 /110.00 @:39 B@:127Recv:1:47:36.475: T:215.26 /21500 B:65.97 /110.00 @:37 B@127Recv:1…
-
In Configuration_adv I noticed that the following was enabled: #define AUTO_REPORT_POSITION So I commented it out and that got rid of the spam.
-
I do have the pro version ill check that out thanks.
-
Its definitely not the gcode as ive scoured it for anything changing the temps, and I ran it again last night and it printed fine. Temp offsets are set to 0 already. I've updated to the latest version of repetier server now. I wonder if intererence…
-
For future people... if the directory still doesnt show up, reboot the pi. It seems like sometimes for whatever reason it cannot see the folder properly.
-
Did some googling and stumbled across a comment that said I should run this "sudo apt-get install usbmount" I did that and restarted the pi. I also made sure I unplugged all my other printers that are connected to the same pi. Then doing the upload…
-
pi@Repetier-Server:/media/flash $ dirpi@Repetier-Server:/media/flash $ ls Im in this directory on putty... and I see nothing in there. The Pi is definitely connected to the SKR v2 as I can see it on Repetier server. But as you can see the folders a…
-
So im getting this: Uploading firmware binary ... Stopping printer connection Old firmware file /media/flash/FIRMWARE.CUR did not exist. Maybe you are using the wrong directory! Copy to /media/flash/firmware.bin Reset printer or send M997 to instal…
-
Repetier said: What folder? USB Stick 1 gets mounted to /media/flash so there should FIRMWARE.CUR appear when mounted and if you select that for upload it should be target. Please be more precise/descriptive - what folders did you select use…
-
So whilst I can actually upload to this area... it doesnt seem to do this. Im connected via Putty and im looking at the directory on the SD card and the upload firmware doesnt actually upload the file.
-
I believe I have resolved it. I needed to build my firmware for STM32F103RC_btt_512K_USB I had STM32F103RC_btt_512K which I guess didnt have the relevant USB setup. The Media/Flash folder now shows.
-
There are no folders in /media when I view it from repetier server
-
I have repetier server running on a raspberry pi connected to 2 machines. The SKR mini is connected via usb, so how do I know which folder to add?
-
I use marlin, both solutions are actually pretty good. I guess I could send something like M203 X50 Y50 from the command console. Then when I wake up again send M203 X100 Y100. Could write that I guess as a custom function that I can select from t…
-
Yeah what I was proposing though (assuming this is how it works is) Repetier could slow down only travel moves. Since travel moves at G0 instead of G1 (at least in cura). I've give you an example where this might be handy. Say ive been printing an…
-
Perfect that sounds great ill give that a shot thanks.
-
I noticed this happens when I click "restart server" from the UI. It restarts but in small mode. If I unplug the PI and plug it back in it boots into normal Ui mode size. I wonder if the restart script is different to the boot up script.
-
Okay so I completely powered down everything and restarted the PI without the screen. Then I turned it off and plugged back in the screen and turned it back on and now its back to normal. Here are the images: https://photos.app.goo.gl/VBd1CBT9CXA4u…
-
Hi, its full screen but all the icons and text are really small and too hard to read. It used to look absolutely fine but I had to restart it one day as it wouldnt connect to my network and when it rebooted the UI was really small.
-
I didnt try any of that no, I ended up downgrading to 93.1 which was the version I was using before and it works fine. When I get some time ill try upgrading again but I have too many pint jobs I need doing in the mean time.