BobS
About
- Username
- BobS
- Joined
- Visits
- 44
- Last Active
- Roles
- Member
Comments
-
It's an official full license that I downloaded from you. I figured it was a license check but forgot about the time check.
-
I look forward to the upgrade. I copied the file and as soon as I started Repetier, it started rebuilding, unsuccessfully. Everything works, just no previews...
-
No, sorry didn't make myself clear. If I re-start Windows, it -will- re-start Repetier automatically. Am I better doing a re-install to clean up the Jason files any my setting?
-
Ok, how can I restart windows without restarting repetier server? would re-installing help?
-
Ooops, forgot a question. Once I move the Jason file, can I force a re-render so that all the unrendered gcode files get rendered?
-
Ok... By reset do you mean a reboot or something else?? I have been having issues with windows and other programs forcing restarts on overnight updates even if I have updates paused for 5 weeks. They are sneaking through, lost a 2+ day print to a …
-
Ok, I found the server logs...It says "repetier render not found" after the upgrade... [02.05.2024 13:51:31] : LUA error calling handleAction:...iles (x86)\Repetier-Server\modules\server\lua\render.lua:198: bad argument #-1 to 'loadJSONFile' (strin…
-
I looked a recent log for a run that didn't render... there was nothing in the logs labeled "render". It starts with the start sequence, and them moves to printing. The 3d preview and 3d image work fine, as does the 3d contol view, it is only the …
-
I upgraded from 1.14.15, so it was only one version upgrade… Where do I find the server logs? Old gcode files that rendered fine, no longer render at all… so something got bolluxed up in my system… I will look specifically at then link between units…
-
Sorry for the long delay, got everything working without TimeLapse... Now I am trying to get timelapse working with tall skiney models. (I am up to 3 printers, all different, running of Repetier. The NEWEST YawCam doesn't mind 3+ cameras. But wi…
-
Dratts to Cura. There are a few neat features that I do use occasionally. (Make overhangs printable, lightning infill, and a few others)
-
This -SEEMS- to be a problem for the 2nd or 3rd logon to a session. The FIRST one seems to login OK, but any further logins, like from a remote computer or want to put up 2printers side by side, fails... What did I do?
-
You need to be very careful of "startup" Gcodes as they may mess up everything. My full "startup" has a G28 in it, along with lots of other moves that will loose its location, and likely crash through whatever is on the plate already. I want it ju…
-
Ok, sorry.... I looked and on my Win11 system and I could not find the config file or anything that look familiar after reading the article. I Installed Repetier Server, and then stopped the service. I was then going to edit the Config file to Poi…
-
I have had several long prints fails after many many hours... as in 82 of 88hr print it just stopped. The log was full of communications errors...I am reluctant to restart my 88hr print as it was a LOT of filament and emotional energy watching and f…
-
FANTASTIC ! Will look for it in the Windows version sometime in the future....
-
I am running printers that only use "Marlin" as the firmware so I am not sure they can understand the "Repetier Binary" protocol. I am hoping to help with the "smoothness" of the command stream as sometimes when printing large objects I can see/h…
-
Is it in Beta or just running late?
-
It -seemed- when I turned off the time-lapse, my cameras went dark... what do I need to set where so that time-lapse is idle, but the monitoring is still active?
-
Ah, it wasn't where I thought it was, I had configured it elsewhere and thought I was done... a reboot and everything was happier.
-
Yep, I had it turned off for a high quality print I didn't want the strings caused by the camera script but wanted to be able to monitor it anyway...
-
Here is a link to a photo of my screen (I hope) https://drive.google.com/file/d/141ma6_xVfJCLPxmyabhJgbHjek2ecJQs/view?usp=drivesdk
-
I never see nozzle temperatures. I haven't run dual nozzles in a while. Just finished 3-day print so I can try things again...
-
Even when I am in 1-extruder mode (90% of the time) I am not seeing extruder temperature. I would post a screen shot but don't see an attachment option...
-
Found it! When I unplugged my other printer and then rebooted it re-assigned the COM port...
-
Ok... on the version I am running (1.3.0) I can see no test anywhere. And the Wizards are also missing. I went to every config screen I could find, and no "Test" and no "Wizards" I looked at Global Settings and at Printer settings Can you tell …
-
I am having similar issues, but on Windows.What are the debug procedures for windows if rebooting everyone doesn't fix it.I know I have connectivity as PING works fine, but something else isn't there...
-
I am running the regular web interface, no client on my tablet or PC or the server PC. When I go to the temp. section I have several things all saying "BED" and the "current extruder" is ON, but not showing.... I was going to post a picture, but t…
-
thanks, I will play with that more.
-
Win10, latest patches applied. I know I can manually disable the screen saver, but I am not always running the server, so it can sleep when it is not running a job...