› ›

stafford

About

Username
stafford
Joined
Visits
15
Last Active
Roles
Member

Comments

  • Moin, moin One night reading the Forum 'Beiträge' in detail and PROBLEME SOLVED!I used all three configuration suggestions ( Legacy, config.txt and the '40-...' file).Trotzdem vielen dank.Despite that the two systems being the same I suppose there m…
    in Touch screen orientation fail Comment by stafford February 4
  • Moin moinmany thanks for the quick response!It is as I suspected. I have Marlin firmware that sends a message to the printer display, but thats all(I think!) I will try to do something with the gpio's. thanks again Christopher
    in Print restart when filament empty? Comment by stafford January 2022
  • Moinalso die ersatz Motherboard ist Eingebaut und functioniert ohne Probleme.Vielen Dank für die SupportmfGChristopher
    in Printer display disabled y Server Comment by stafford December 2021
  • Moin moin > Also Ich habe die G-Code eingegeben, aber der Mega X Display bleibt deaktiviert!Sorry, it got "Lost in translation" So this is what I have tried:1. Switch off Mega x and Pi.2 Switch Mega X on then Pi.3. Mega X reacts to Z Axis contro…
    in Printer display disabled y Server Comment by stafford November 2021
  • Danke!Also Ich habe die G-Code eingegeben, aber der Mega X Display bleibt deaktiviert!Das einzige was funktioniert is das buzzer befehl!! Ich habe Erfahren das es ein double belegung von der schnittstelle sein könnte.Ich schaue nach und melde mich n…
    in Printer display disabled y Server Comment by stafford November 2021
  • Moin moin,eine kurze zwischen Frage! "Wenn wir starten senden wir  M530 S1 L70        M531 Name        M532 X0 L0        M75"Meinst du beim jeden print start?Und ist es getrent von der Print job G-Code erstgeschickt?mfGChristopher
    in Printer display disabled y Server Comment by stafford November 2021
  • Danke für die schnellen Antwort. The Mega X display. The Pi System works very well. I will check the G-Code and let you knnow. mfG
    in Printer display disabled y Server Comment by stafford November 2021
  • P.S.When the print job is finished or stopped due to an error( eg "Thermal runaway") the displaystays disabled.
    in Printer display disabled y Server Comment by stafford November 2021
  • MoinWell, I couldn't see/find it anywhere, and after I got everything working I rechecked to see ifI had missed it. Still can't find it but now I know its easy;-), I'ts probably just a "fluke" of my system but perhaps it should be mentioned in you…
    in Install problem. WLAN does not connect Comment by stafford May 2021
  • Moin Moinindeed the lightning bolt shows "never". So I've now got two power supplies!! And now to my problem....Hardware:     All original Rasberry. Pi 4B + 7" Touchscreen.Software:     Repetier Pi OS + Repetier-Server image V25 1.0.4Software ammend…
    in Install problem. WLAN does not connect Comment by stafford May 2021
  • Thanks for the info.I have ordered an original power supply for the Rasberry.Let's see what happens!mfGstafford
    in Install problem. WLAN does not connect Comment by stafford May 2021
  • MoinThanks for the answer "trotz" weekend!1. Yes, Country is set to "DE".1a. Also with the OS + Rep.Server v25 image the touch screen is a bit "trager".     In case its a power issue I have ordered a 5v 3amp power unit. 2.  I have tried a ".deb" ima…
    in Install problem. WLAN does not connect Comment by stafford May 2021