rixstaa
About
- Username
- rixstaa
- Joined
- Visits
- 25
- Last Active
- Roles
- Member
Comments
-
Did you get a fix? I have no scripts in my script box and stuggling. Best ive got it so far. Some times I press 0.1 left on X and Y starts turning. E only turns threw lcd position. They thump when I press home and do nothing, some times…
-
Did you find a fix? Im having same thing Ive used the default setting command for printer but I was at 25000 baudrate, when I saved it lost connection and wouldnt connect. I checked lcd for baudrate which had changed to 11520 so I changed repeti…
-
null Tell us then? What the point in saying it easy and not telling us how to do it then?
-
Im sort anet out and il check back im fed up of this 1 I got a bunch of vseries, nema 23s 17s and 14s but cant even get this piece of crap to work so maybe im in wring hobby or something cuz every one talk like they know what they talking about, yo…
-
People who made the host cant even give a direct answer. Ive even done videos up there and can see my setting and feed log Last one I done before I tried to do greetechs set up today which failed. I wont be doing any more as any one …
-
Hi M115 gives 100 feedrate. Yes I bought a couple of kits and Im asolutely new but I have done a few months researching. I already grabbed that github and tried to copy it. I copied all the eeprom ect but not got to flashing yet as I wouldve t…
-
Hmm thats something too. How did using a older version of repetier make my baudrate change from 25000 to 11520 and now Ive put the latest host back on its still at 11520? But wjat im saying is is, how did that manage to flash my lcd? Or was that the…
-
Hmm still no joy. I followed a guide were I gcode reset to default and save. It wouldnt reconnect so had to change to 115200 baudrate. Ive had motors turning in some way or another but never all at same time. Now I can use lcd and go to position-e…
-
Bro. Im newb your going to have to tell me like nursery child Im trying to show best I can threw video and asking every were but not getting dorect answers. Im at what ive done above. The orinter obviously came woth them settings new and…
-
Right now. I followed this guide. https://reprappro.com/documentation/huxley/commissioning/#Windows_7 I got the original settings but right now I used the reset command. Even tho its for ponterface I done it with repetier host. I…
-
And how do you set the drivers to that? Melzi 2.0v5. 1 sec mate batterys dying. Here check description I just uploaded this. I will be back soons some charge. Its still clicking now lol. Yea my calculation 88.889 Im put them back to that. and 2…
-
No not worked from the start. Ive had the pots max 0.780v and messing with steps per mm the motors will turn some times right down to 0.2v depending on steps per mm and accelerations. Yea im 16 tooth calculations been 88.889 x and y 2560 on z. Bu…
-
Having similar issue. I think its the driver pots. My machines new too. Driver pots Steps per mm Accleration Feedrate. Problem is is, if you dont have a proper steps per mm, accel and feedrate, how can you tune the pots. So im thinking tune by…
-
Im on about the forum aha jot the programming.
-
I think last bit cover me bro, Im check them steps as I was at 400 with it shaking. Started with single digits That wasnt the numbers the calculator gave thats for sure. Max I got was 200. and 2560 for Z. I will do X and Y now. Shall I up the volt…
-
I installed 2.0 same probs. Will google. Can get them to crawl to end stop when homing when cant get manual control working 1mm 10mm ect. I turned pot down on extruder to stop the heat.
-
Installed repetier 2.0.1? latest one. Same problems as videos. Is there a reliable setting I can tune my pots to on a dry run or with manual control? Is there a print in dry mode option? amd can I tune pots like that?
-
Using repetier v1.6.2 but v91 installed on printer. Im so close aha. 400 steps per mm 40mms feedrate 30mm s homing feedrate "in video its at 31 and needs 31 to get any movement." 10 jerk, playing with these now. 3000ms2 acceleration …
-
I cant create a new name and the drop down dont drop down either. Only real bug Ive noticed like that.
-
wirelessguyny said: Some added info... Apparnetly Pronterface is able to connect at 250000 Baud and reads off some data from the printer. However... if I use that baud setting in Repetier after the successful connect the board resets itse…
-
Did you get a fix?
-
The jumpers his talking about are next to your reset button 3 pins, 2 front or 2 back be jumped. 2 front for firmware threw usb "no psu," back 2 pins for normal function. Cant see that being the problem. Put your cache to 63 under, printer settings…
-
All videos. Im wait for reply here as Ive exhausted everything else.
-
Na you know what it is OP, to much bs. We shouldnt have these problems. Some one needs to just fix them and charge the companies for using the software. Give it foll like us for free but catch them and sue them. Cant be selling machines at this cos…
-
Click files on repetier 1 them take you to the programme its stupid I found this yesterday after a good month searching. Kind of like he says. It took me to some hidden spot I hadnt seen aswell as the files so moved them with the rest. Printer still…