Last Active


  • Installation and configuration complete. It only remains to test. Too bad all the same for this update which took me the whole day. Florian
  • I tried to access via a virtual machine under linux, same, no web interface. Reinstalled 0.91.2 ok but 1.1.2 does not work.I will download the whole image, I will have to reconfigure my two Prusa Mk3s
  •  ps aux | grep RepetierServerrepetie+  2439 99.5  1.0  19560 10312 ?        R
  • I uninstalled modemmanager, reboot; still the same pi@Repetier-Server:~ $ sudo apt-get remove modemmanagerReading package lists... DoneBuilding dependency treeReading state information... DoneThe following packages were automatically installed and …
  • login as: pipi@'s password:Linux Repetier-Server 4.15.18-v7 #1 SMP Mon May 7 16:35:40 CST 2018 armv7l The programs included with the Debian GNU/Linux system are free software;the exact distribution terms for each program are described…
  • Repetier_Support said: As I said, please reboot your machine. 3 times I post the SSH content, ok
  • I just took my 0.91.2 backup and updated via SSH.Always 504 Gateway Time-outnginx / 1.10.3 SSH is working, the WEB interface is no longer working, the port is good.
  • I will reinstall everything, I'm angryNext time i will wait
  • Hello, I have exactly the same problem. Switched from 1.03 to 1.1 and my server no longer responds: 504 Gateway Time-out I have my license since 2019 and I have not had any problem. Florian
  • Hello, When the screen disappear my console say in repetier that lines 13:35:09.053: ok13:35:09.053: N146650 M73 P83 R-2 Q83 S-213:35:09.068: ok13:35:09.068: N146651 G1 X111.805 Y110.978 E0.025213:35:09.068: N146652 M204 S80013:35:09.077: NORMAL …
    in LCD Comment by orlins May 2019
  • Hello, Another time, the bug Appear ! If i turn the knog to reduce speed at 98 percent, menu appear. If a turn the Knob to set the speed at 100 percent, the menu desappear !!!!!
    in LCD Comment by orlins May 2019
  • orlins a dit: Repetier said: I have just finished my upgrade to MK3S and updated firmware to 3.7.1 and do not have any problems with M117 destroying menu. Once I had it vanish when I used the menu and after some more clicking…
    in LCD Comment by orlins May 2019
  • in LCD Comment by orlins May 2019
  • Curl line for upload Gcode to Repetier server : [Simplify3D] "curl.exe" -i -X POST -H "Content-Type: multipart/form-data" -H "x-api-key: 1efcc939-xxxxxxxxxxxxxxxxxxxx" -F "a=upload" -F "filename=@[output_filepath]" "…
    in LCD Comment by orlins May 2019
  • Oh no....the menu disappear again , one press on the knob, menu appear, waiting...menu disappear...wait 2 minutes menu done.
    in LCD Comment by orlins May 2019
  • Hello, No M117 in Gcode. When I click on the button, the menu appear and desappear when i quit the menu....strange ! I'm happy, I bought a license    !!!! And I found my problem of LCD , Finally, it does not do it anymore. I found the solution.  …
    in LCD Comment by orlins May 2019
  • Same problem at the end of the print ! Progress  information is disabled. FW 3.53 (MK3) and 3.6.0 (MK3S)
    in LCD Comment by orlins May 2019
  • I found the line , cool !!!!!!! Tanks
    in LCD Comment by orlins May 2019
  • Thank you for this information, I have the problem on both printers FW 3.6.0 and 3.5.3 how can I disable sending progress information? Need to edit a file?
    in LCD Comment by orlins May 2019
  • Hey Same Message, Do this (if you're purge line is G1 Y-3.0 F1000.0 ; go outside printing area ):