› ›

orlins

About

Username
orlins
Joined
Visits
9
Last Active
Roles
Member

Comments

  • Installation and configuration complete. It only remains to test. Too bad all the same for this update which took me the whole day. Florian
    in Installation 1.1 kill my raspberry server Comment by orlins August 2021
  • I tried to access via a virtual machine under linux, same, no web interface. Reinstalled 0.91.2 ok but 1.1.2 does not work.I will download the whole image, I will have to reconfigure my two Prusa Mk3s
    in Installation 1.1 kill my raspberry server Comment by orlins August 2021
  •  ps aux | grep RepetierServerrepetie+  2439 99.5  1.0  19560 10312 ?        R
    in Installation 1.1 kill my raspberry server Comment by orlins August 2021
  • I uninstalled modemmanager, reboot; still the same pi@Repetier-Server:~ $ sudo apt-get remove modemmanagerReading package lists... DoneBuilding dependency treeReading state information... DoneThe following packages were automatically installed and …
    in Installation 1.1 kill my raspberry server Comment by orlins August 2021
  • login as: pipi@192.168.1.212's password:Linux Repetier-Server 4.15.18-v7 #1 SMP Mon May 7 16:35:40 CST 2018 armv7l The programs included with the Debian GNU/Linux system are free software;the exact distribution terms for each program are described…
    in Installation 1.1 kill my raspberry server Comment by orlins August 2021
  • Repetier_Support said: As I said, please reboot your machine. 3 times I post the SSH content, ok
    in Installation 1.1 kill my raspberry server Comment by orlins August 2021
  • I just took my 0.91.2 backup and updated via SSH.Always 504 Gateway Time-outnginx / 1.10.3 SSH is working, the WEB interface is no longer working, the port is good.
    in Installation 1.1 kill my raspberry server Comment by orlins August 2021
  • I will reinstall everything, I'm angryNext time i will wait
    in Installation 1.1 kill my raspberry server Comment by orlins August 2021
  • Hello, I have exactly the same problem. Switched from 1.03 to 1.1 and my server no longer responds: 504 Gateway Time-out I have my license since 2019 and I have not had any problem. Florian
    in Update from 1.0.4 to 1.1.0 (locale::facet::_S_create_c_locale name not valid) Comment by orlins August 2021
  • Hello, When the screen disappear my console say in repetier that lines 13:35:09.053: ok13:35:09.053: N146650 M73 P83 R-2 Q83 S-213:35:09.068: ok13:35:09.068: N146651 G1 X111.805 Y110.978 E0.025213:35:09.068: N146652 M204 S80013:35:09.077: NORMAL …
    in LCD Comment by orlins May 2019
  • Hello, Another time, the bug Appear ! If i turn the knog to reduce speed at 98 percent, menu appear. If a turn the Knob to set the speed at 100 percent, the menu desappear !!!!!
    in LCD Comment by orlins May 2019
  • orlins a dit: Repetier said: I have just finished my upgrade to MK3S and updated firmware to 3.7.1 and do not have any problems with M117 destroying menu. Once I had it vanish when I used the menu and after some more clicking…
    in LCD Comment by orlins May 2019
  • in LCD Comment by orlins May 2019
  • Curl line for upload Gcode to Repetier server : [Simplify3D] "curl.exe" -i -X POST -H "Content-Type: multipart/form-data" -H "x-api-key: 1efcc939-xxxxxxxxxxxxxxxxxxxx" -F "a=upload" -F "filename=@[output_filepath]" "http://192.168.1.212:3344/print…
    in LCD Comment by orlins May 2019
  • Oh no....the menu disappear again , one press on the knob, menu appear, waiting...menu disappear...wait 2 minutes menu done.
    in LCD Comment by orlins May 2019
  • Hello, No M117 in Gcode. When I click on the button, the menu appear and desappear when i quit the menu....strange ! I'm happy, I bought a license    !!!! And I found my problem of LCD , Finally, it does not do it anymore. I found the solution.  …
    in LCD Comment by orlins May 2019
  • Same problem at the end of the print ! Progress  information is disabled. FW 3.53 (MK3) and 3.6.0 (MK3S)
    in LCD Comment by orlins May 2019
  • I found the line , cool !!!!!!! Tanks
    in LCD Comment by orlins May 2019
  • Thank you for this information, I have the problem on both printers FW 3.6.0 and 3.5.3 how can I disable sending progress information? Need to edit a file?
    in LCD Comment by orlins May 2019
  • Hey Same Message, Do this (if you're purge line is G1 Y-3.0 F1000.0 ; go outside printing area ):   
    in Defined Printer Limits Comment by orlins May 2019