opy01
About
- Username
- opy01
- Joined
- Visits
- 38
- Last Active
- Roles
- Member
Comments
-
So I was messing around with the config and found that dtoverlay=vc4-fkms-v3d (note the f in fkms) worked but the overlay was massive and I only saw the left 2/3 of the screen during calibration even though the screen looked fine before calibration.…
-
Ok I think this Pi 4 install is hosed. I tried what you said and after running the first command it said "chromium: no process found". I tried the update option in the raspi-config and it said "There was an error running option 8 Update". I tried…
-
To add to the Pi 3 and touch issues, in Pi config tools I try to go to the /boot/firmware/config.txt and see if something is off but it takes me to /boot/congif.txt and tells me the file has moved. That definitely needs to be fixed.
-
I understand. I try to know a little about everything, but that just makes me ask more questions lol. I will try messing with some settings and if I still can't fix it I will order a new USB cam. I put klipper on my Ender 5+ so I swapped the orig…
-
It is a UC-420 Pi camera. Not sure anything past that. It is so old I cannot even find it in my Amazon history lol. It turns green even with a 6" cable which is not near long enough. My old Pi 4 with this camera went through a 6" cable to an HDM…
-
Repetier said: Yes pi 5 has a narrow CSI cable now. Just be aware that they use software compression (so higher cpu usage but works) but I improved the streamer a bit and it worked even with 2 pi cams on my test pi 5:-) I finally got my ca…
-
Ok I found a cheap USB camera in a drawer and it works. Look like that one may be defective or just not compatible. I have new cables coming for my Pi camera tomorrow since the onbord camera plug on the Pi 4 and Pi 5 are different. The camera is …
-
just ran it and got this: root 24152 0.0 0.0 2392 1648 ? D 10:36 0:00 /usr/local/bin/mjpg_streamer -i /usr/local/lib/mjpg-streamer/input_uvc.so -d /dev/video0 --fps 25 -q 85 -r 640x480 -o /usr/local/lib/mjpg-streamer/output_ht…
-
I GOT iT! The pins I had in the original post were correct. I flashed the adxl345 on my other Pi with a different version of Klipper. I finally found an error message I could use lol. I created a new file for the adxl345 ad flashed it from Repet…
-
It looks like the rpi/klipper_host_mcu adxl345 is only the on board pins on the Pi. So this USB adxl345 seems to be either something different in the rpi/klipper_host_mcu or the pins are not accepted by either Klipper or Repetier when assigning the…
-
update on input shaper. I ran the comment "TEST_RESONANCES AXIS=X" just to see if the eccelerometer works in Repetier and my results are below. I am not sure how Repetier recognized my USB adxl345 or if there is a way for my to specify it somewher…
-
Ok I loaded V36 with no validation errors after flashing the SD card. Set my wifi up in the wpa suplicant file and it connected. So far so good. I had issues with touch still but found on an octoprint forum that I needed to com ment out dtoverlay…
-
Ok I am going to try V36 tomorrow. Not sure if something is just flaky with V37 since it is set up for the Pi 5. Hoping that's all it is. I put my old SD card back in and am up and running again, just cannot run image shaper to get the settings. …
-
I can't even putty to the new server.
-
Still cannot get the touchscreen to work. We will now start touch screen calibration. Make sure that noscreensaver is active. You need to touch 4 marked points in orderand then come back to this display. Press any key to continue /usr/local/Repetie…
-
I just don't think it is seeing my USB adxl345. --2024-02-27 20:46:22-- http://download1.repetier.com/files/server/extras/inputShaping.shResolving download1.repetier.com (download1.repetier.com)... 94.130.164.39Connecting to download1.repetier.com…
-
Getting this now: ###### Install numpy ###### Using pip 23.0.1 from /opt/klipper/Ender_5_Klipper/klippy-env/lib/python3.11/site-packages/pip (python 3.11)Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Link requires a …
-
Ok now the only think is the touch screen. I enabled it in repetier-setup but it does not work. Only once did the calibration screen show up but no points showing me where to touch. If I slap the other SD card back in the touch screen works. So …
-
This is why I hate using a new image. I cannot use my mouse on this as it is not visible and I have to click around to see where it is. The touchscreen does not work. I cannot connect to my home wifi even though I chose the SSIS and put the corre…
-
I keep getting flash failed on multiple SD cards with the latest download. I flashed Fluidd just fine with this card reader yesterday. I am proceeding anyway since it is just a validation, but it does worry me a little.
-
Ok I did not want to do this, but I am installing a new image. Luckily I have spare SD cards so I can just set the existing one to the side. I backed up my printer configs. I'll let you know how it goes.
-
I was afraid of that. I really didn't want to reinstall Repetier image as my Pi is enclosed in my Ender 5+ housing (replaced my Ender 5+ LCD with a Pi screen). I did update Python and when I run python --version it says 3.11.8. I also updated t…
-
I have that and I see the support. When I click on start input shaping, it asks for my axis and start/end frequencies and then does nothing. I have Python 3.12 installed and set as my default. I followed the instructions in the manual for install…
-
I'm using a 0.4mm nozzle. After replacing parts and recalibrating everything it seems to be back on track. I did have issues with wifi before but stopped using 5G and went back to my regular wifi and it worked fine. If I keep having issues I wi…
-
Thanks for the update. WiFi has gone out twice this week. Once the day of the update, after I started a 30 hour print, then again on Thursday. Both times a reboot fixed it, but this never happened on 0.92. The bad layers may have been a partial …
-
Repetier said: That is why they should be all twisted to reduce this effect. Shielding would be even better but we all know they are normally not shielded. So twisting and position are the only defenses against this. I may do that later, b…
-
@Repetier That appears to have been the problem. Thanks! That was on by default in the web configuration utility and unless I know what it does I usually don't touch it lol. It's odd because my other Mega 2560 had that set to 1 with no issues but…
-
@RAyWB I'll check the enable pin to make sure there is no mismatch, but it should be a standard Mega 2560 configuration. @Repetier Going to try it and see how it does. I'll know shortly.
-
I already thought of that. With Marlin it prints fine at 0.2mm layer height. I loaded Repetier with the same setting (in theory) and Y skips or just stops. I reduced the current and the driver and stepper both are nice and cool. It still did it.…
-
I never could get it to work right so I tried to load Marlin back on and that didn't work at all. I even tried using their factory firmware but then started getting AVR errors in Repetier Server AND in Arduino. I finally fixed my bootloader and …