lorenzing
About
- Username
- lorenzing
- Joined
- Visits
- 32
- Last Active
- Roles
- Member
Comments
-
I've also updated but when I open the clipper menu, an empty drop-down menu appears. I await your suggestions, thank you very much!
-
Same problem too with klipper firmware!
-
Hi, I've the same problem. Have you any solutions? Thanks
-
Yes. Tanks as soon as possible check the log file (/var/lib/Repetier-Server/logs/server.log).
-
Repetier said: Yes, our firmware v2 supports the board and also the next server release has an uploader. Already used it with my board successfully. You can get an intermediate version by changing download name version with 0.93.2 - just make…
-
Hi, have you any news to flash rumba32 with repetier server? It's a card that's becoming very popular.
-
Sometimes here i've the same problem, also with Klipper.
-
Hi, thank you! I recently discovered that stcubeprogrammer for linux, I have to try to see if it works on raspberry and it could be the solution, it would be very nice to integrate the function in your interface. Even recently on marlinkimbra a co…
-
It would be a very useful function, I hope it will be implemented as soon as possible!
-
Hi roland,I wanted to ask you if there is any news regarding the ability to handle multiple repetier servers from a single dashboard.Congratulations on the work done so far. best regardsLorenzo
-
I think a wrong pin mapping. I have the rev. 2 and if I put the heater pin (in configuration.h) it work but not the same for the extruder motor.
-
Repetier said: It also sends timelapse computation and later also slicing. I think it's more convenient to have a single dashboard to control the various emergency stop level printers, video and temperatures. But without pulling up gcode…
-
I have removed the resistance and it works perfectly. Thanks so muchLorenzo
-
Thank you very much for your help
-
The temperature measured without sensor is 499 °, with the sensor 481.9 °
-
Unfortunately on this board there are no free other analog pins. and 'the problrma can be corrected by software? I could fix the AD595 multipliers?
-
Dambergn said: I have been trying to do exactly this. I would like to have a raspberry pi server set up on each of my printers but a central print server that can manage them all from a central location. I am of the same opinion. It wou…
-
Thank you very much! For me it is very important to control multiple printers from a single panel. Keep me updated on the development of this feature
-
Repetier said: The problem with light is that there are so much solutions and wishes. You want it dimmed, others want it red while heating, blinking on error etc. And then we have different light solutions. Current solution is to use event sy…
-
Roland, I saw that on the standard version someone has already implemented: https://github.com/imrahil/Repetier-Firmware/commit/5f4263bf007d4f11b47d24e26a7fd5164962df59 I wanted to ask if you can also add on DEV. It would be very nice to associate i…
-
Ok thanks
-
Repetier said: I was thinking about it. But having had problems with bigger resolutions I voted for a healthful compromise as default and making it at least easy to change. If it's a not complicated thing, would be very useful to include…
-
maralb said: hi Roland, can add alligator-manager full image also enable the UART for alligator RPI link thank you https://github.com/3Dartists/alligator-manager following the instructions does not work Error getting blank page not be an ex…
-
In the future it would be nice to be able to choose the resolution directly from the web interface.