MasterCATZ
About
- Username
- MasterCATZ
- Joined
- Visits
- 7
- Last Active
- Roles
- Member
Comments
-
I had a print stop for unknown reason nothing in logs nothing showing in message que unsure if server rebooted or not but its showing uptime 9 days ? printer was reporting finished and steppers were disabled heaters all hot and part being melte…
-
ok would be good to help find what z layer was being printed when it fails using Bowen system and having filament issues from all the long retractions the teeth eat up the filament and it stops feeding , leaving me having to guess what layer to r…
-
yes but I only get every 10th snapshot showing because the lowest setting was 10fps ? I am wanting image on every layer not based on print time ie) @ 10 FPS 4 hrs 400 layers being 40 sec footage , if I was doing 60fps it was only 6 second video…
-
e.framerates=[{v:10,n:"10 fps"},{v:12,n:"12 fps" e.framerates=[{v:1,n:"1 fps"},{v:10,n:"10 fps" /usr/local/Repetier-Server/www/js/app-min.js
-
so "enable log communication while printing" ? or also enable "idle"
-
Host 2.1.6 Server version 1.0.3 even some settings like speed between these seem to get out of sync (if host is not hung) how do I get server to show log , I have host running logs but it seems to hang a lot on large prints click print , server…
-
/var/lib/Repetier-Server/printer/Da_Vinci_20/jobs finally found it 00000003_90mmnetpot200deep.recover why does the recovery file not contain any information about extruder / temps ? recovery heats up the correct extruder but prints with the cold…
-
yes would be greatly helpfull to be able to just load up the remaining of the print to visually check it over before print continues
-
where is that recovery file saved ?so I can correct the wrong extruder it tries to run everytime I do recovery it uses my empty extruder ... regardless if I have , "replay Extruder Switches " on or off ...
-
mine always tries to resume with the wrong extruder where can we find the file to correct? also currently In a situation where power was restored before server was online so pi has no ip adress for me to acess unsure how I will even get the restor…
-
sad how PrusaSlicer supported OctoPrint but not Repetier Server will the new repetier host have a way to flip the GUI image of the print placement currently its all backwards looking from the rear (0.0 location bottom left start point ) and not …
-
ok I will stop trying to use curaengine then , and I almost had it dailed in how ever how do I get repetier host to use PrusaSlicer-2.2.0+linux-x64-202003211856.AppImage ?
-
having same issue I can manually set the temp but when it starts printing drops to 50deg and i have to retweak it again in CuraEngine I have Filaments set for 235deg and 110deg bed but it keeps starting as 210deg 50deg I even have these wanted …
-
-
I have computations turned off with the pi's API added I have 128 threads available (AMD Ryzen Threadripper 3990X) https://ibb.co/pykn5HY I am pretty sure it is que depth related because it is computing a task for another machine its sitting th…
-
This is on Linux ,I am wanting a way to separate permissions to allow service to be restarted instead of it wanting to reboot my main pc ,, I want normal users to be able to restart service but not reboot / shutdown
-
can we have a way to restart the service in the GUI on our PC it does not seem to restart cleanly how can I create a user setting that will allow "service" to be restarted but not restart/shutdown (but still have admin login that can ) created …
-
does anyone have a config file for da vinci 2.0 duo https://www.repetier.com/firmware/v100/index.php
-
I bought the pro version because of the talk about using PC to do cloud computing and can not work out where these settings are ? is it this section with the API keys etc ? http://localhost:3344/#!/gsettings/connectivity the raspberry pi 2b sti…
-
Da vinci 2.0 1.17-08-01_1.3A Repetier0.92.10M should I try and do a upgrade ? from memory it was hell to get flashed the first time