rezjat
About
- Username
- rezjat
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
Thanks a lot for your suggestions! Yes, patience it was I need
-
Thanks for your feedback! Current retract is 2mm, 40mm/s speed. I will try with 1.5mm Material is PLA, BQ, 210º. That 50% of nozzle diameter is a general rule? Thanks!
-
I forgot: nozzle 0,3mm, 40 speed, layer height 0.2, 100% infill
-
It makes sense, thanks a lot for your time and feedback!!
-
One question... If the support has to get to a certain fixed eight to "touch" the supported object, could slic3r recalculate the layer eight/number of layers to ensure the supports arrives exactly the support eight?
-
Yes, I dissabled the override option to avoid any interference. Nevertheless, I also tried the other way: dissable supports in the Slic3r configuration, and override. In this case, I got the same result: it changes the number of layers (and the…
-
Thanks for your feedback! I doubled checked it, and no... It is set to 0.2. What I do is just to "check" the support option on or off, keeping the rest of the configuration. I do not know why it changes the layer eight...
-
In my case it is so slow that is almost unusable. Do I need a hardware openGL driver?
-
Fully right! For me it is not intuitive to build supports when they are disabled, but you are right. Once that parameter is set to 0 (with support disabled in both cases), now it works correctly. Thanks a lot Martin. Really appreciated your time an…
-
Ok, here it is the link: https://www.dropbox.com/s/ulcmzbi0cas245p/Slic3r_config_bundle.ini?dl=1 Thanks!
-
Sure I can. How can I share it? It looks like I cannot attach it as a file in this forum...
-
Yes, I rotated it 180º to print it flat and to avoid any support, but I did not modified it at all. In fact, I observe the same issue in other models, either designed by me, or downloaded from thingiverse. I think I have to move to other printing s…
-
Thank you very much for your interest and time! Really appreciated
-
Ok, here it is: https://www.thingiverse.com/download:4466569
-
I think it does not work. How can I attache a file here?
-
Sure I can, it is public. I changed the extension to "jpg" so I can attach it
-
Yes, it happens in other models as well, not always relevant, but sometimes disturbing... You can see other example bellow (model and slicing): Skirt, brim, support, all of them at "0" or unselected...
-
Thanks a lot for your comments. The only additional thing I have is skirt, but I removed it and skirt dissapeared, but not the issue. Brim is at "0", not activated, Support not activated. Shield and prime tower are options that I do not find in any…
-
Hi. I recover this thread as I am still with the same issue... As soon as I upgrade Repetier, I get that "support like" slicing. Now repetier version is 2.1.6, and Slic3r is 1.3... Does this happen only to me? Thanks for any suggestion. Best regard…
-
Great, so I can search, download and use the slic3r version which is embedded in repetier-host 2.0.1 (which is 1.2.9) and use it in the most up-to-date repetier-host version. Thanks for your support!
-
Thanks for your feedback. One question... The slic3r version in repetier-host is embedded, and it cannot be changed independently from repetier, right?
-
Yes, I mean that "support like" line. I do not use raft, no skirt, no support... Nothing. In fact, I re-installed 2.0.1 version, and now the same model with the same profile does not show that... I would like to know the reason to be able to upgrad…