Aero3D
About
- Username
- Aero3D
- Joined
- Visits
- 5
- Last Active
- Roles
- Member
Comments
-
I formatted the card and loaded the image as a brand new install using ApplePi-Baker. This was not an 'upgraded' installation. I believe the missing extra detail on that screen, distance, selected extruder, is all part of the same issue with missi…
-
SD card was formatted prior to installation. Printer setup as previously (I had another thread running with the many issues with 0.86.2) as a CR-10S with single extrruder. Even if no extruder (which there were) why would I have no Home button and n…
-
Is the new release still planned for this month? Thanks
-
The issue of screen info disappearing as per all the posts before this one in this thread (Page 1 ) Thanks
-
HI. Any idea on timescale for updated version that may fix this issue? Don't really want to have my license wasted as not working on any of my printers any more Thanks.
-
Fantastic. Thank you so much. I look forward to it.
-
Thanks for all the help. I've tried different Pi 3's, different SD cards, new images and nothing fixes these issues. I'm now back with Octoprint which just works. It's not pretty but it works. I will try Repetier again when a new version comes o…
-
Right clicking on the Pi screen is only switching between Printing and Temperature screens. No context menu.
-
OK thanks. I just started another print from my Chrome browser console and immediately got this (image above, console text copied below) 12:40:46.656 vendor.bundle.js?lang=en&front=1&12cb7e9e80bcb38da705:22 EXCEPTION: Cannot read property…
-
It is now working only partly on Pi screen and also only partly on remote browser screen. You can see on image above (Pi screen) the temp graphs and all data (temp, layer, fan speed, etc) is all missing. And on the remote browser screen the progre…
-
I'm afraid I don't know how to do that. However, by pressing a few keys on a keyboard (attached via 2.4MHz dongle) attached I got this
-
-
Also, now via the standard browser interface, I now get a lack of information for the extruder temperature. I would just like this to work as intended. I am using a Pi3 with a fresh install of the RS 0.86.2
-
Now, even via the remote browser interface (Safari) I get this after clicking on an item to print. I give up. Will need to find an alternative solution I think.
-
Always the print progress screen. When I see that the circular progress indicator is not displaying and the layer number not progressing I switch to the Params or Temp screen and then back to the progress screen. It is then that all the graphics d…
-
Running another big print now and all good via the browser interface in safari (http://ip:3344/modules/front2/www/app.html/) but the Pi screen is missing all the info again. I'll look into how to compile firmware as you suggest above, but I'm still…
-
Maybe time to buy some new USB cables. I think the one I'm using on the CR10 is an old Motorola Mobile cable (as it uses old style mini USB)
-
I've now run 2 prints without the PC interface and all is good. No idea what is going on but 2 consecutive prints with no loss of Pi screen interface. Looking at the Print logs though, there are regular Communication timeout warnings. No idea if …
-
Just commenced a print with the interface running in Chrome and, for the first time in weeks, it is behaving properly, both in the Chrome interface AND the Pi screen. When complete I'll run another one without the Chrome interface and see how it be…
-
I have upgraded firmware to latest versions on both printers. On the Prusa I am using the latest Prusa 3.1.0 and on the CR10 I am using a fork of the latest Marlin. For the CR10 I have tried multiple versions of TH3D Studios Unified firmware and a…
-
OK, downloaded and reloaded the latest Pi image but absolutely no difference. First print, progress screen is locked without updating, if I switch to parameter screen and back to print screen all the info is missing as per the images above. Really…
-
OK, downloaded and reloaded the latest Pi image and doing new tests. Note to self: save the previous printer profile before renewing image
-
HI. Thanks for the reply. Yes, it all worked fine initially, using your 0.86.2 image for Raspberry Pi, and then a few weeks ago just started behaving like this. I wonder whether it may be Marlin firmware related.
-
Whilst the remote screen via browser is still all present and correct
-
So, 10 minutes into a print, started from the Pi screen and this is what I get. On the Printing screen, the Home button has disappeared so only way to navigate back is to select Temp or Params and then it reappears and can press it.
-
My apologies. I will go take a look. Please then close this thread. Thank you.
-
But I'm using Server on each machine. My Load filament is set to 450mm fast and 60mm slow. I would just like to automate the remove filament, from the screen, as much as possible as after all is that not one of the benefits of using software like …
-
Sure but any chance of setting a remove distance. With a long Bowden tube it takes a lot of 10mm presses to extract when unable to manually release extruder gear. Thanks.
-
Yeah, that would have made more sense. Thanks.
-
So, appears sending G28 initiates the homedelta.g file in the printer firmware (all firmware) which tells me that Prusa version of this file contains an instruction to carry out a mesh bed level if it DOES NOT receive the '[space]W' command as well.…