Marcwolf
About
- Username
- Marcwolf
- Joined
- Visits
- 23
- Last Active
- Roles
- Member
Comments
-
Ok.. But as a Licensed user of Rep-Server, and a donator to Rep-Host I would say that this is a pretty large omission when 2 packages from the same software developer cannot share settings.
-
Hi. If you read my question - I am using Rep-Host. Not some other software. I wish to export my printer settings to Rep-Server. This question was placed in the Re-Server forum to indicate which server I was referring to. How can this be done. The p…
-
Will there be an option in the future to use an external Cura. I have 3.1 and I would like to use some of it's advanced features, as well as have a link to Repetier Server.
-
Repetier said: Pass through is currently not supported but on my todo for later as it is not widely used. The port solution is good. Normally we use /dev/serial/by-id so that would not change by selecting different port, but there is also /…
-
Hi. When I mention number the ports I actually meant a textor on the pi case. Can you explain how to set up by path Many many thanks
-
Hi.. An Update. I have found a utility called 'socat' and this will create a TCP/IP to USB connection on the PI side. Now I just have to ensure that I number my USB ports and tell Repetier Server only to use specific ports for the printer, and I…
-
Many thanks
-
Many thanks for the above advice. It looks like it was a poor quality USB cable. The above tests will be very helpful to dianose any other issues I am having exp with some of the mods I am doing to my printer. Again thanks for your help Dave
-
Ok.. But if the printer is powered on - then the arduino would not be drawing from the RPi... Anyway - I will do some more tests tomorrow. Many thanks for all of the advice
-
Hi. I am using a certified Pi power pack and the printer is plugged in to the raspberry pis USB. No hub Many thanks
-
Many thanks. I have decided to use the standard web sire for now. It seems that everything on the 'screen' is on the website anyway. Many thanks for your help
-
Hi. Ok. I have been looking through the system. When I log in on the console I get a display that allows me to control a lot of the system. It is run from openbox and this url http://127.0.0.1:3344/modules/front2/www/app.html However if I then …