› ›

barth

About

Username
barth
Joined
Visits
21
Last Active
Roles
Member

Comments

  • Hello ! you can look here : http://rapid-pcb.com/ it is easy to use ! And the gcode can be used with Repetier Host for milling and drilling
    in CNC mill and 3d printer hybrid Comment by barth February 2016
  • Strange thing ! Why don't simply download a real FTDI driver on the site :http://www.ftdichip.com/FTDrivers.htm ? I have that for two or three cards, arduino and other ! And no problems with update or windows update
    in Warning about chinese Melzi Boards (with solutions) Comment by barth February 2016
  • I finally find this famous "pin 63" (for autoleveling in repetier firmware) ! It's very simple ! It's the physical pin number 88 on the chip atmega2560, also labeled Analog Pin 9 labeled A9/D63 on the connector AUX2 on the RAMPS (pin conn 4 ) re…
    in Where is PIN 63 ? Comment by barth January 2016
  •  is not a very good explaination , le firmware Repetier is not only for a RAMPS ! What's for other boards ? I find that : https://www.arduino.cc/en/Hacking/PinMapping2560 There are only one Pin 63 on Arduino 2560, it is the 63th pin of 100 on the …
    in Where is PIN 63 ? Comment by barth December 2015
  • What files,and in what folder and subfolder, to be deleted ? in win XP And why older firmware like Marlin, Mackerel and other always works with IDE, and the firmware REPETIER  don't work correctly ?
    in Compilation error version 1.6.xxx Comment by barth December 2015
  • Thanks for the answer But the file "twi.c "  is present in the Library folder! No fix ? Other Firmware, such as Marlin or Mackerel (for extruder wire) work correctly with Arduino 1.6.5, and are compiled without problems Should I therefore cont…
    in Compilation error version 1.6.xxx Comment by barth December 2015
  • No more infos about this error !
    in Compilation error version 1.6.xxx Comment by barth December 2015