Paxy
About
- Username
- Paxy
- Joined
- Visits
- 41
- Last Active
- Roles
- Member
Comments
-
Yea, it is strange.Tested all three modes. While VBO and arrays make no difference, Immediate displays model correctly, but gcode preview gave the same issue.Tomorrow, I will test again to force RM execution using High performance GPU (Nvidia), but …
-
No.Three models:- slice first with Repetier-host - Print button to send to Repetier-server - everything OK- when it is done- slice second- Print to Repetier-server- everything ok- when it is done- slice third- Print button freeze Repetier-host- Noth…
-
Great. I will test it with next release.And yes, ussualy I have to reboot Alix to get server up and running again.
-
I might have found situation it happens. For some reason both of repetier servers has crashed (PC and Alix) after runing following:/usr/bin/ffmpeg -loglevel error -f concat -i /var/lib/Repetier-Server/printer/MP20/timelapse/20160515T142404_3D_test_V…
-
No, upload is done over RepetierHost. But, maybe RepetierHost is reason of this. Sometimes, after I send print to server. RepetierHost freeze and Linux kill it after few moments.
-
Hmm, It could be. Often I had to stop printing, by resting Arduino, if for ex. first layer do not stick to bed.
-
Same happens once more. But after rebooting Alix everything backed to normal (both render, and video).Storage is not issue, there is at least 500mb space at Alix.In Alix board, external USB flash is mounted and linked as snapshoot folder so JPEGs an…
-
Hmm, after today reboot, both services came online again.Is there some limitation like, Alternative Server MUST be online all the time ? Maybe it stops working if I reboot Alternative Server or something like that ?
-
Great job with 0.75.Is there any news about Cloud slicing ?AstroPrint offers free server and slicing already witch may take off some of your loyal users.I like Repetier Server much more because of its extended functionality and flexibility, but I am…
-
My issue was similar and I solved it by replacing EEPROM values with default ones.http://forum.repetier.com/discussion/1800/3rd-extruder-issue#latest
-
Ohh, solution was simple but took me some time.It is just requred to replace EEPROM configuration with default values, but increasing EEPROM_MODE. Maybe you can put in comments under MIXING EXTRUDER or EXTRUDER NUMBER, suggestion to replace EEPROM c…
-
Perhaps my issue is similar to:http://forum.repetier.com/discussion/1702/extruder-won-t-move-3-mixing-extruder#latest One thing I noticed: While EXT1 and EXT2 have Steps per millimeter EEPROM value, EXT3 does not have it.EXT2_STEPS_PER_MM is defined…
-
I have read that you have made some sort of Server Slicer, but I did not find a way to use it.How can we use Server Slicer? Which one it is (Cura?)? How its profiles can be configured? Server Slicer is one solution, it is better then Slicer on Clien…
-
Ok, Have setted time, date, time zone and NTP. Recording interval is 1s and Record Always is enabled. Recording image is displayed in live webcam preview. Mjpeg-streamer is used for video source so jpeg source is available via http://3dprinter.paxy…
-
Oh, my mistake, looks like this avrdude is part of https://github.com/arduino/arduino-flash-toolsSo no ln was required, just it need all files from that project.Question is, should be there x32 or x64 used, my guess x32.
-
Log file:Before 'ln' and after. 2000-01-08 14:14:28: LUA job firmwareUploadJob#{"filename":"/var/lib/Repetier-Server/tmp/tmplua0.hex","lang":"en","slug":"Kossel800","verbose":1.0000000000000000}2000-01-08 14:14:28: Connection closed: Kossel8002000-0…
-
But, even with this fix, upload hex still not doing the job.It now stops at "Uploading firmware binary ...". Is there any way to see command line it execute, so I can debug further ? P.S. 2560 has been used.
-
Right post-processing was my tough as best solution. Even thinking to add some scripts to Repetier Server so I can process some Saved G-codes with templates (ex. only Nth extruder, custom extruder wipe, turn off bed after 4th layer ....)
-
Yes, manual editing G-code file doing job just fine after slicing for 1st extruder. But it would be great if you can, in future versions, integrate this code replacement when only 2nd or 3rd extruder is set in module.
-
Not sure if slicer like CuraEngine support this, but if it is possible to add some custom command, like @pause, after each layer would be great feature.It would be special useful to play with some wiping technics and anti oozing for dual extruders.
-
Yes, wrong version of Cura is in current Linux package. Just downloaded Cura 15.04.2 and replaced one from package and slicing works correctly !
-
Ok, I see where problem is.12:20:40.858 : Config(/home/paxy/.local/share/RepetierHost/cura.ini):L13: Failed to set 'skinSpeed' to '30'12:20:40.858 : Failed to read config '/home/paxy/.local/share/RepetierHost/cura.ini'After that it stops processin…
-
Another bug now (with this version) presented. Slicer ignores Adhesion type and always use None (only skirt after slicing) no meter if there is Brim or Raft selected.
-
Tnx, now buttons are not disabled and I can resume work after code upload is compleat.
-
Chrome on Linux UbuntuWireshark shows that transfer is from webcam (port 8080)