No you can only paste images that are stored on some other server like your dropbox.
The visualization will be exactly the same as in the gcode preview once the job was printed. Except if you get a message about the frame rate in your leg which can cause degradation to simple lines.
You should not have enabled command logging. Do this only for tracing errors. Without you would have seen the message about reducing visualization quality. You can disable this behaviour in properties->basic settings->Disable Quality Reduction. Not sure why this already happens with such a simple object. Press alt+f to see framerate in the right lower status bar corner to see how bad it really is.
New install will use old settings, that does not help. All you search is in preferences. In basic settings you have quality redurction and in 3d visualization->filament you set filament visualization quality which should be medium. What you see is simple.
Try installing with legacy 3d library selected to use the old 3d library as before. Seems like the new version selects the wrong opengl driver for intel graphic cards. Please let me know if this helps. so I can make a better hint for others.
OK , fixed random crashes, but while printing if I click on another tab , then go back to the print preview , the program will crash .. hope this helps to nail down the issue.
My "3D virtual print display" has stopped working again , and seem to happen after a win 10 update any one else seeing or not seeing as the case may be the "3D virtual print display"
Comments
is there away I can post pictures on here..
after slicing the image shows , but when you go to manual mode no image shows.
the show filament is enabled sometimes it will show a small bit of the print but when you zoom In the lines go very thin and it no longer updates
OK image 1 is the view as soon as the image starts to print , image 2 is when I select zoom extents , and the 3 image is viewd from front
https://www.dropbox.com/s/0424n3evauda9nl/image1.png?dl=0
https://www.dropbox.com/s/pgzincpf8h1gruk/image2.png?dl=0
https://www.dropbox.com/s/xivfvc7y3cmqk4k/image3.png?dl=0
https://www.dropbox.com/s/xivfvc7y3cmqk4k/image3.png?dl=0
Well after much looking around the repetier host software and comparing with a new install , I can not resolve this issue .
Any other ideas?
I have almost got it back .. thatnks for you help..
I just updated to the new release version and now this version keeps crashing ..
im using window 10 on a sony vaio with intel graphics card