BUT i can't use the SD Port anymore.
I'm not able to connect to my RADDS/Due-combo anymore, when the SPI connection (MISO, CLK, MOSI) pins are plugged in. Before this problem occured,I've narrowed the problem down to the SPI-connector, however, my LCD is not powered anymore, unless a 5V-USB-Cable is plugged into the Due.I'd be grateful for any ideas!Armin
I still have some issues in stealthchop mode with diagonal moves (only one motor moves). The holding torque off the standing motor is to low so it starts to move. My mechanics are ok.