-
get info from command excecuted gcode in frontend
by Repetier ·Ok some ideas for you. First in bindings is a file globalOptions.ts which looks like this: -
Z Homing Bed Leveling
by SigmaFive ·#define ENDSTOP_PULLUP_X_MIN true -
Forced position for time lapse
by Repetier ·In Printer Configuration->Tools->General Extruder Parameter you can define a small z lift which is then also used for timelapse to prevent this. -
WebCam: Works on PI itself, not if on HUB
by CBX_Micha ·... just back with the Dog. Before, I have disabled the display autodetect and define it manually. That was the 1st strike. The 2nd one is that the handling of the serial ports are changed in bookwor… -
WebCam: Works on PI itself, not if on HUB
by Repetier ·Parsing header files is out of scope. It is a programming language and can be quite complex if you do not just add values after the #define statements. It could be computations with other macros, ... -
WebCam: Works on PI itself, not if on HUB
by CBX_Micha ·#define X_BED_SIZE 235 -
Manual mid-print Filament-Change with single extruder
by Repetier ·Add -
issue using config tool either 92 or 1.0
by recoush ·EXT0_TEMPSENSOR_TYPE 1#define EXT0_TEMPSENSOR_PIN TEMP_0_PIN -
issue using config tool either 92 or 1.0
by recoush ·#define EXT2_ENABLE_PIN ORIG_E2_ENABLE_PIN -
How do I connect my Repetier-Server to a hidden WiFi?
by Repetier ·You need to manually define it as described in README.md in /boot/firmware -
X axis Geeetech Mizar Max
by Repetier ·Since the end stop is also at the right side I owuld say this is correct and a design decision from geeetech. I wonder why you want to change this? You can define homing position to be 320 for x so h… -
Z Endsstop crashes into bed after pullup in right direction.
by The_Maschinist ·Okay, first i deactivated line 310 #define ENDSTOP_Z_BACK_ON_HOME 0. It issued a so called: "Compilation error: 'DIOFAN2_PIN_WPORT' was not declared in this scope" -
All extruders working at the same time
by Repetier ·In tools tab you activate "Extruders share same heater from extruder 0 definition (SHARED_EXTRUDER_HEATER)" and define 3 extruders with same heater and thermistor settings and remove option… -
All extruders working at the same time
by Repetier ·You have configured it as mixing extruder and default setting is all move same amount. If this is not possible it is better to define instead 3 extruders with shared heater. Then you can also have ac… -
Why "printing in air" can appear, alerady from start of model 3d drawing??!
by RomanVK ·#define always_check_endstops 0 -
Why "printing in air" can appear, alerady from start of model 3d drawing??!
by RomanVK ·#define always_check_endstops 0 -
Why "printing in air" can appear, alerady from start of model 3d drawing??!
by RomanVK ·#define always_check_endstops 0 -
Bed and Nozzle temperature
by Repetier ·You must define temperatures first and save and later select that one on the right side in effective slicer settings. -
temistör nor workiing
by Repetier ·#define SUPPORT_MAX6675 -
Wireless ad-hoc local connection
by Repetier ·Yes, it has an access point mode that gets activated if it sees no known networks. You can define it in network settings on second tab. You can also say to always enable it if you want that.