#37 0x00909f0c in __clone ()

#37 0x00909f0c in __clone ()

Greetings I hope they are well, my name is felix and I am super new working with 3D printers. And I currently have a mini Rostock, with a proximity sensor and use the Melzi board. The questions I hav…

Recently purchased a pro license as Iv been using the free one for a while and really like it.

ssh root @ repetierserver.local after this i must give a pasword = raspberry 

Thanks, will do that and get back to you.

Ok on 8MP Noir Raspberry Pi camera you need to use the alternate instructions:

all is ok, i have do a modification in  /etc/rc.local and add  the line for start webcam  at the start /usr/local/bin/mjpg_streamer -i input_uvc.so -o "output_http.so -w /usr/local/share/mjpg-st…

Hi,

Another Problem:

"If you are satisfied and if you have a z-max endstop you can also send a “G29 S2” to measure the print area height and store it in eeprom (S1 will only measure the height)."

Hey,my new RepRap is up and running (more or less), I'm able to print (well, hot plastic is being spewed around my bed but it's a start!), problem is my Z axis moves very slowly. When I manually adju…