[19393.906266] usb 1-1.4.3: usbfs: interface 0 claimed by ch341 while 'brltty' sets config #1

#1 0x00909da8 in __timedwait_cp ()

#1 0x00909da8 in __timedwait_cp ()

#1 0x0090940e in __sigtimedwait_time64 ()

* “I ended up using the drivers in legacy mode and setting them to SpreadCycle using the OTP (One Time Programmer). Unfortunately trying to set individual drivers to SpreadCycle via UART by enabling H

the print preview is extruder #1 only

#1  0x00000000 in ?? ()

;@extruderColor 2 #123456

    #1) Respect the privacy of others.

[  +0.138191] usb 2-2: usbfs: interface 0 claimed by ch341 while 'brltty' sets config #1

Linux RepetierServer 5.15.32-v7l+ #1538 SMP Thu Mar 31 19:39:41 BST 2022 armv7l

Sysl:23:11:59.464: [ 902.707974] usb 1-1.2: can't set config #1, error -32

Linux RepetierServer 5.15.76-v7l+ #1597 SMP Fri Nov 4 12:14:58 GMT 2022 armv7l

"We trust you have received the usual lecture from the local SystemAdministrator. It usually boils down to these three things:    #1) Respect the privacy of others.    #2) Think before you type. 

RepetierServer ntpd[602]: Deleting interface #11 wlan0, fe80::e65f:1ff:fea5:64e0%3#123, interface stats: received=0, sent=0, dropped=0, active_time=256 secs                           Nov 29 09:40:08

"0 1 0 -1 0 1 0 0 1" #180 Grad      Option "TransformationMatrix" "-1 0 1 0 -1 1 0 0 1" #270 Grad #       Option "TransformationMatrix" "0 -1 1 1 0

#180 degrees

Tainted: G C 5.10.63-v7+ #1496 Jul 23 16:56:33 RepetierServer kernel: [618941.851961] Hardware name: BCM2835 Jul 23 16:56:33 RepetierServer kernel: [618941.851965] Backtrace: Jul 23

Jul  1 17:41:35 pi-server kernel: [  179.308314] usb 1-5: usbfs: interface 0 claimed by cp210x while 'brltty' sets config #1

Jul  1 17:41:35 pi-server kernel: [  179.308314] usb 1-5: usbfs: interface 0 claimed by cp210x while 'brltty' sets config #1