-
I need help about menu on 12864 display
by MartinH ·#define ST7920_DELAY_1 DELAY_NS(63) -
Must "Stop Print" manually after print finishes
by endertown ·#define PRINTJOB_TIMER_AUTOSTART -
Firmware Update Melzi 2.0v5
by Repetier ·before each #define MACRONAME to remove the old definition without warning. -
Firmware Update Melzi 2.0v5
by jacksonaarond ·#define EXT0_TEMPSENSOR_TYPE 1 -
No need for Z-probing before print if G32 and G33 were executed even before reset?
by good_idea ·#define Z_PROBE_Z_OFFSET 0 -
Z_axis_go down after homing_and_print_in_the_air
by fandrom ·#define CONFIGURATION_H -
GCodes skipped
by MartinH ·#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -
Problem in controlling 3D printer via smart display controller
by Repetier ·#define UI_ENCODER_SPEED 2 -
Issue with enabled "Z-Probing" on zonestar based printer with repetier 0.92.0
by Rentner ·#define MIN_HARDWARE_ENDSTOP_Z false -
Printer slows down a lot for long passes
by Repetier ·#define DEBUG_QUEUE_MOVE -
Fysetc mini 12864 and SMART RAMPS
by ttnd ·#define SDCARDDETECT 49 // sd card detect as shown on drawing -
Radds 1.5 und Reprap World GLCD
by UPS ·#define BEEPER_TYPE 1 -
Radds 1.5 und Reprap World GLCD
by Repetier ·#define SDSS 10 -
Radds 1.6 or due not initializing/booting correctly on 1.0.2
by ZibbeZabbe ·*/ #ifndef CONFIGURATION_H #define CONFIGURATION_H /**************** READ FIRST ************************ This configuration file was created with the configuration tool. For that -
Firmware retraction not working as expected
by opy01 ·#define FEATURE_RETRACTION 1 -
How to setup 2 in 1 out HE3D K200 to print 2 colours
by Giomlyon ·#define CONFIGURATION_H -
Version 2 Compilation Errors
by RAyWB ·//#define EEPROM_AVAILABLE EEPROM_NONE -
Firmware upgrade from version 1.x to 2.x. User experience.
by lmcbmai ·#define ZPROBE_ADDRESS &endstopZMin -
Repetier Firmware 2 Lüfter für Bauteil ansteuern
by Repetier ·#define FEATURE_FAN_CONTROL 1 -
Repetier Firmware 2 Lüfter für Bauteil ansteuern
by Hobbit ·#define CONFIGURATION_H