HI, morning.  I am having the problem of stopped printing beacause of message:

Hi repetier, 

Ok, it happened what I feared. The output takes longer then the move so no buffers build up and start/end speed are just jerk/2 (if it is 14.4 for your tests). So you get always accelerations on ever…

I have been working around this for a while but I don't seen to get it to work. "Then add initalization for that driver in ui.cpp" - may you elaborate more on this. 

Hi Repetier

Arduino 1.6.7, latest version from master (4.3.2016) - the same result, no manual extrusion.Arduino 1.6.5, repetier 0.92.6 - manual extrusion works.

Here's the firmware I received along with my Melzi 2.0 and LCD2004A kit. (Repetier v.91). When I open up Repetier-host, it says that the printer name is FIRMWARE_NAME:Repetier_V1.4 http://zonestar3d.…

I mean does sendingM104 S255

My zmin endstop is the sensor probe, I have the probe connected to the zmin endstop in the ramps.

Thanks for the fast replay.

Thanks UniversalRemonster ! The probe Z is working now, but i notice one more problem was the XY locaiton for auto level was not what i want?  But i check with the panel face moving the nozzle around…

Well, there's a lot wrong with this configuration.h. First Z-Probe is disabled haha. Below, in red, are the correct settings you should use. 

DECOUPLING_TEST_MAX_HOLD_VARIANCE is a region to be hold when end temperature is reached. This message . raised too slow - comes during inital heatup and means in

I followed your suggestion and installed the AD8495. i connected it to the aux adc.

Hi again,

So if i want 10 µS i should really say 5?

Hi Repetier,

It's \nNo need to delete action "ui_menu_quick_origin" just duplicate with new name and see where it gets added. Below that list is a counter that needs to be increased as well and voila, y…

thanks for your advice. I will try to probe it now.