#define CONFIGURATION_H

#define NUMTEMPS_14 46

#define TEMP_0_PIN static_cast<int>(PC_4) // T0 pin is listed as PC4 which is pin 36 not pin 5

#define NO_TIMEOUTS 1000

//#define NO_TIMEOUTS 1000 // Milliseconds

simply add #define RFSERIAL Serial2 at beginning of configuration.h

#define CONFIGURATION_H

#define DISTORTION_CORRECTION 1

#define NUM_HEATERS 2

#define BED_LEVELING_GRID_SIZE 2

Send:17:46:40.742: N18 M303 E0 S200 C8 Recv:17:46:40.747: PID Autotune start Recv:17:49:55.126: bias: 66 d: 66 min: 196.25 max: 204.02 Ku: 21.64 Tu: 43.75 Recv:17:49:55.126: Classic PID Recv:17:49

Recv:17:35:05.323: #define DEFAULT_bedKp 40.19

#define THERMAL_PROTECTION_HYSTERESIS 7

// Ultimaker #define DEFAULT_Kp 22.2

With the new firmware and server upgrade everything now seems to be working (even the bed is heating up quickly since I disabled "//#define PIDTEMPBED" in the Merlin config.  The only thing

#define Z_PROBE_Z_OFFSET 0

#define X_MAX_LENGTH 250 #define Y_MAX_LENGTH 250 #define Z_MAX_LENGTH 250 But it doesn't seem like that when I move my axis...!It's like it consider it 90 x 90 x 90! Could it be something regis

...... some config from configuration.h #define DISTORTION_CORRECTION 1 #define DISTORTION_CORRECTION_POINTS 5 #define DISTORTION_LIMIT_TO 0 #define DISTORTION_CORRECTION_R 60 #define DIST

#define NUM_HEATERS 2

#define SD_RUN_ON_STOP "G28"