-
PanelDue Sd-card
by Repetier ·#endif -
Cable Robot using Repetier
by Jagi ·#endif -
Z axis not moving at all on COREXY
by Bleachworthy ·#endif -
1.0.4dev homing problems -CR10S (Crealty 2.1 board)
by badvision ·#endif -
Afinibot A3 upgrade problems
by jonarotz ·#endif -
Linear advance extruder stops
by overdrive ·-1 //#define SDCARDDETECTINVERTED 0 //#endif #define SD_EXTENDED_DIR 1 /** Show extended directory including file length. Don't use this with Pronterface! */ #define SD_RUN_ON_STOP "" -
Firmware 1.0.4dev not compiling
by Repetier ·#endif -
No voltage output on D10 pin while G1/G2/G3 command in laser mode
by rdzawka ·#endif -
Print randomly pausing at retract
by opy01 ·#endif -
Dual X carriage printer - cooling fan
by Repetier ·#endif -
BLTouch not working
by neoh ·#endif -
Printing a Dot in Lasermode
by RAyWB ·#endif -
Z probe height
by The_Geak ·#endif -
Problem with Z axis
by Dave_Da48 ·#endif -
MABL mit BL Touch
by Bonobo ·#endif -
Problem using 3 Z steppers and bed leveling
by bryanbdp ·#endif -
Add reversing motor direction flag for mirrored axis steppers in next Release (MPCNC and similar)
by LucidWolf ·WRITE(X2_DIR_PIN,INVERT_X_DIR);#endif } else { WRITE(X_DIR_PIN,INVERT_X_DIR);#if FEATURE_TWO_XSTEPPER || DUAL_X_AXIS WRITE(X2_DIR_PIN,!INVERT_X_DI -
Having trouble with new printer using v 1.04 and Repetier Host. OK w/ factory Marlin using R. Host
by Repetier ·#endif -
problem with firmware
by j_tmec ·#endif -
Repetier 1.0.3 | Blank LCD after upgrading | Printer: Hatchbox Alpha | LCD: SCM12864F
by Repetier ·#endif