thielewerli
About
- Username
- thielewerli
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
Now i load the dev version and the offsets a working good. thx
-
Where can I get the dev version?
-
On my LCD the z niveau is displayed 10.00 No I am not using the dev version.
-
I made another test. Ext1 offset = 0/0/0 Ext2 offset = 0/0/24000 (shown in Eeprom values). z axis step/mm = 2400. Here the tested g-code g90 g28 g1 z0.2 g1 x10 y10 t0 g4 s3 g1 x250 f1000 g1 x180 y10.1 t1 g4 s2 g1 x180 y200 f2000 g1 x180 y100 t0 g4 …
-
Repetier said: I can imagine that the problem comes from the tool switch. Z gets either added before or after switch depending on bed movement required to not hit bed. My workaround is following. I want to print with two or more Extru…
-
I am working on a cartesian printer with a automatic hotend/extruder changer. The hotends have there parking position outside the printing area. I tried to use the x y z extruder offset, but only x and y is working correct, the z offset is not worki…