› ›

thielewerli

About

Username
thielewerli
Joined
Visits
4
Last Active
Roles
Member

Comments

  • Now i load the dev version and the offsets a working good. thx
    in Coordinates offsets Comment by thielewerli March 2017
  • Where can I get the dev version?
    in Coordinates offsets Comment by thielewerli February 2017
  • On my LCD the z niveau is displayed 10.00 No I am not using the dev version.
    in Coordinates offsets Comment by thielewerli February 2017
  • I made another test. Ext1 offset = 0/0/0 Ext2 offset = 0/0/24000 (shown in Eeprom values). z axis step/mm = 2400. Here the tested g-code g90 g28 g1 z0.2 g1 x10 y10 t0 g4 s3 g1 x250  f1000 g1 x180 y10.1 t1 g4 s2 g1 x180 y200 f2000 g1 x180 y100 t0 g4 …
    in Coordinates offsets Comment by thielewerli February 2017
  • Repetier said:  I can imagine that the problem comes from the tool switch. Z gets either added before or after switch depending on bed movement required to not hit bed. My workaround is following. I want to print with two or more Extru…
    in Coordinates offsets Comment by thielewerli February 2017
  • I am working on a cartesian printer with a automatic hotend/extruder changer. The hotends have there parking position outside the printing area. I tried to use the x y z extruder offset, but only x and y is working correct, the z offset is not worki…
    in Coordinates offsets Comment by thielewerli February 2017