› ›

sydneigomes

About

Username
sydneigomes
Joined
Visits
7
Last Active
Roles
Member

Comments

  • As soon as I finish the project completely, I will send a video with how the implemented tools work. Tks
    in MPG Controller Comment by sydneigomes February 2022
  • Perfect. Yes, only one will be responsible for sending commands at a time. Bluetooth will send object positioning and detection commands and USB will send cutting commands.
    in MPG Controller Comment by sydneigomes February 2022
  • Sorry if I wasn't clear in my question. My interest is in Repetier Firmware. On the USB port I will use the communication via Repetier Host and on the Bluetooth port I will use the MPG. As for Repetier Host, I have no doubts about how it works. What…
    in MPG Controller Comment by sydneigomes February 2022
  • Thanks for the answer. I will not use Repetier-Server. I am using Repetier Host and via Bluetooth, through MPG I will send GCode commands to move the CNC. That's why my question is if I can use both communication ports at the same time. USB and Blue…
    in MPG Controller Comment by sydneigomes February 2022
  • Hello again. I'm still trying to add an external MPG-type controller to my CNC. The idea now is to try to communicate via bluetooth, but I have some doubts. Is it possible to use the controller through both communication ports, via usb and via bluet…
    in MPG Controller Comment by sydneigomes February 2022
  • About your question "Which firmware are you using? V1 or V2?" On the download page there is only the option of 1.0.x and 0.92. I didn't see the V2 option. Where it is located? Thanks
    in Find edges - XY Probe Comment by sydneigomes January 2021
  • Good Morning. Thanks for the answer. I still use 0.92. I made a lot of changes to the source code and now I'm stuck with that version until I have enough time to migrate all of them to the new version. Could you give me a tip on how to insert the pr…
    in Find edges - XY Probe Comment by sydneigomes January 2021
  • I am resuming the probe design in X and y, but I am trying in a different way than explained above. I am trying to modify the BedLeveling :: runZProbe function. I managed to modify it so that the x and y axes move according to the probe's need, but …
    in Find edges - XY Probe Comment by sydneigomes January 2021
  • I am resuming the probe design in X and y, but I am trying in a different way than explained above. I am trying to modify the BedLeveling :: runZProbe function. I managed to modify it so that the x and y axes move according to the probe's need, but …
    in Find edges - XY Probe Comment by sydneigomes January 2021
  • Could you help me? Only the options for X, Y and Z axes appear in the Mechanicals menu. In the Tools menu there is the option to add a new extruder, but the extruder options are only Extruder 0 to Extruder 6, as shown in the attached image, which yo…
    in 4th Axis Comment by sydneigomes February 2018
  • Sorry. For more information, I use Ramps 1.4. Thanks
    in 4th Axis Comment by sydneigomes February 2018
  • In my opinion, a single probe connection could serve all axes, thus avoiding having to change the connection of the other for each alignment to be made. The Universal GCode Center has just released a new version (V2) that also performs probe on all …
    in G30 Comment by sydneigomes January 2018
  • Or this to locate a center of a circle, at 03:20.
    in G30 Comment by sydneigomes January 2018
  • See how the ESTLCam does. This is super important for replacing the milling cutter at the same location after an exchange or even after breaking the milling cutter.
    in G30 Comment by sydneigomes January 2018
  • To get the precise location of the beginning of the cut. In the same way that Z works
    in G30 Comment by sydneigomes January 2018
  • Hi Repetier. Do you intend to deploy probe functionality also for X and Y axes?
    in G30 Comment by sydneigomes January 2018