› ›

nicodarg

About

Username
nicodarg
Joined
Visits
3
Last Active
Roles
Member

Comments

  • I managed to fix it but I am not sure how. I think I reflashed the firmware, restarted the printer and then changed a line in the config because [mcu] was pointing to another port and that did the trick. Thanks for the help
    in Package has no instalation candidate Comment by nicodarg August 2022
  • I used the config here https://github.com/Klipper3d/klipper/blob/master/config/generic-bigtreetech-skr-mini-e3-v1.2.cfg https://imgur.com/a/1y62z7cOr am I missing something?
    in Package has no instalation candidate Comment by nicodarg August 2022
  • Hi! Thanks for the reply. I am using a Ubuntu 22.04.1 LTS and the processor is Intel Celeron J4005. That managed to solve it, but I have another poblem now. I was able to create the firmware following a guide (I have SKR mini e3 V2), flash my Ende…
    in Package has no instalation candidate Comment by nicodarg August 2022
  • Hi! Thanks for the reply! I will have to give linux a try then How about the first command line to install klipper? From the install manual, it says git clone https://github.com/Klipper3d/klipper ./klipper/scripts/install-octopi.sh Since it says …
    in How to install Klipper on Windows? Comment by nicodarg May 2022
  • @ryane3p seems like a a good approach but that is way above my budget since now I am not planning on expanding the amount of printers @Repetier how about using a usbdrive (pendrive or HDD/SDD) for storage? Kind regards!
    in Some doubts setting up for 5 printers farm Comment by nicodarg June 2021
  • No, I am currently running marlin on the enders, but heard of klipper wonders and was willing to give it a try! About the wiring, is it correct that the enders go to the hub and the hub to the pi, right? Thanks again!
    in Some doubts setting up for 5 printers farm Comment by nicodarg June 2021