mcmatrix
About
- Username
- mcmatrix
- Joined
- Visits
- 21
- Last Active
- Roles
- Member
Comments
-
Thanks for the info. I think the bad boy was my extra backup folder & content inside the firmware directory. At least after removing that extra folder the service started to work. I don't have such file on /var/lib/Repetier-Server/database fold…
-
I think I found a cause and solution to my issue. I made previously a backup folder under /usr/local/Repetier-Server/firmware/ where I stored the Klipper.xml firmware file previous version before trying 1.1.2 update. I also had this folder before my…
-
Hi, I have again the same issue. Updated to the latest from 1.1.1 (like instructed in changelog) My 1.1.1 was a clean install from the image. The RepetierServer service is not starting correctly it runs till "Reading firmware data ..." and stays t…
-
I used a new SD card and installed a fresh Raspberry Pi image V26.After restoring from backup and configuring everything, it now looks okay.
-
Hi, Sent that file to info email. Yes, I have my own lines in firmware file Klipper.xml but this file is always overwritten during install.
-
I'm still not able to get 1.1.0 running. When I downgraded the repetier-server from 1.1.0 to 1.0.4 then version 1.0.4 immediately started to work. Tried to install the latest version once more but it stopped at the same point. When manually running…
-
Thank you. Now it looks like it's waiting for "Reading firmware data ..." pi@Repetier-Server:~ $ sudo -u repetierserver LC_ALL=C /usr/local/Repetier-Server/bin/RepetierServer -c /usr/local/Repetier-Server/etc/RepetierServer.xmlRead configuration fi…
-
Thank you!
-
Repetier said: As long as you make comments start with ; as supposed to be for gcode:-) But guess that is a sample that you can now enter except the wrong comment syntax for gcodes. The repetier-server will not see these comments. It's Kli…
-
If anyone is interested then I'm testing these Klipper macros. [gcode_macro REPORT_FILAMENT_WIDTH] variable_last_width: 0 gcode: {% set current_width = printer['hall_filament_width_sensor'].Diameter|float|round(2) %} {% if current_width …
-
Thank you! That was exactly what I was looking for.
-
Thanks. The beta version fixed the scrolling issue.
-
Repetier said: Just tested with 7" display and could still scroll. What kind of display are you using? Did you try reloading the gui? Sometimes javascript does not get reloaded on update maybe. Made several restarts to the server. I think …
-
Klipper specific info you can find from Klipper's site https://github.com/KevinOConnor/klipper/blob/master/docs/Probe_Calibrate.md https://github.com/KevinOConnor/klipper/blob/master/docs/Delta_Calibrate.md or from facebook Klipper groups.
-
@Repetier Thank you! In ssh shell, I was able to perform the update to 0.93
-
Thanks, I'll try that.
-
Repetier said: If autoupdater sees the 0.93 (which is enabled) clicking on autoupdate should work if nothing blocks the download. Yes, it sees the update. It's showing the changelog and when I'm clicking on auto.update button in the bottom…
-
@Repetier Thank you for the new version. Is the automatic RPi update to version 0.93 already working? When I'm pressing the update button in repetier-server then it shows spinner, but it looks like it's not updating.