maralb
About
- Username
- maralb
- Joined
- Visits
- 684
- Last Active
- Roles
- Member
Comments
-
could it be my problem too ?? https://forum.repetier.com/discussion/4209/filament-change#latest
-
i from original installer raspian jessie loaded http://wiki.friendlyarm.com/wiki/images/7/71/NanoPC-S2-eMMC.png then server 0.86.2.armhf. everything works well but I can not install the touch
-
I nanoPi S2 with lcd touch 7 " You can get information about how to install the server. I see that someone has managed to run it on this platform thanks
-
I'm always upgraded to last version
-
Large format small display It would take a 7 "10" compliments
-
These are the commands Use only for changing the ABS-PLA-PETG coil Not during printing My fast length is 750 mm Slow 18 mm N20 G1 X0.00 Y0.00 F2400 > 22:47:31.311: ok 20 < 22:47:31.311: N21 G1 Z0.00 F2400 > 22:47:31.313: ok 21 < 22:47:3…
-
Only when the system is switched on for the first time
-
download4.repetier.com/files/server/images/Repetier-Server-Image_0_85_0_v7.zip
-
thanks Roland I installed a new image Formatted everything sorry
-
Hello members I made a mistake, I disagreed the WLAN access this command "sudo mv manageWifiAccess manageWifiAccess_off" There is a way to enable ?? many thanks
-
even with my 0.80.3 often falls connection ..... I have to reconnect with digit password I changed the password with a easy because many times often enter
-
Image V4 seems to be corrupted. sorry I can not be loaded in SD
-
I updated with new posts img file version above. the controls work well yet to fix web cam setting
-
I communicate with Marco Antonini to have a new configuration script to install on Server 0.80.1. sorry I thought it was very easy to get to from Roland thanks
-
hi Roland, can add alligator-manager full image also enable the UART for alligator RPI link thank you https://github.com/3Dartists/alligator-manager following the instructions does not work Error getting blank page not be an expert in linux progra…
-
thank Roland, sorry, after calibration I have a distance of a few millimeters. and does not touch the buttons windows. I have to change touch. What do you recommend ???
-
a nice touch, that version model I'm testing a 5 "Waveshare GPIO version Alligator Board 32 I have a lot of touch accuracy problems
-
Another problem with yes or no answers in the server reboot does not touch
-
Ok, are important commands to Delta level
-
is new Touchscreen Interface? I installed the SPARKLAB version can upgrade with 0.80 files?
-
ciao, This file also includes the Touchscreen Interface I also have a paid version of delta printer installed with server I manually update my RPI3?
-
thank you all ok great man
-
Thanks ok works loading with armhf just that I have finished the activation key for 5 times- sorry I only did tests with raspberry PI where you are connected to the code with annulate evidence of raspberry I do not understand
-
.img SPARKLAB all ok good. I want to start with new configuration from the beginning I do not know which file to load for raspberry P3 armhf: libc 2.16 like used in Debian Jessie. Use armel if you have a older libc. or amd64: libc 2.13 like used …
-
Thanks OK waiting time ?? I downloaded the SPARKLAB version found on the German forum RepRap I also have the full version of the Server Ho un LCD Waveshare 5 " RPI 3 thanks
-
hi, You can have full .iso file of your RPI p3 ?? I fail with the whole package installation
-
during the first printing after the G28 the fan is switched on until the top of the layer of turn off immediately. if I try to manually extrude the fan starts work excuse my inglish use traslator google :-S
-
with the old version okay no problem with BabyI still use 0.92.3Stampante delta alligatore Sorry
-
everything perfect with the new update thanks
-
> Maralb> if I Zprobe and Z-correction (distortion correction) everything works fine with M42 if not active have problems with answers.