Repetier_Support
About
- Username
- Repetier_Support
- Joined
- Visits
- 24
- Last Active
- Roles
- Member, Moderator
Comments
-
Hello. Is your klipper instance installed with our installer? The klipper config will only get included in the backup if it is located in the /var/lib/Repetier-Server/database folder
-
you can upload your image at https://imgur.com/ and share the link Also I just saw that your ports are wrong declared. It is : not / so your links should be: http://192.168.1.104:8081/video.mjpg http://192.168.1.104:8888/out.jpg
-
Hey. ich sehe gerade das da irgendwas mit dem encoding schief gegeangen ist beim posten. localhost:3344/printer/api/?a=send&data=%7B%22cmd%22%3A%22M220%20S25%22%7D%0A&apikey= bzw (100%) localhost:3344/printer/api/?a=send&data=%7B%2…
-
Hallo. Direkt unterstützt wird dies nicht. Du kannst allerdings einen cronjob erstellen und deinen drucker mit curl folgende links aufrufen Drucker auf 25% setzen: http://localhost:3344/printer/api/<slug>?a=send&data={"cmd":"…
-
Hello. Do you have any undervoltage warnings? What kind of hub do you use?
-
Hallo. Was klappt denn nicht? Bei welchem Schritt kommst du nicht weiter?
-
That sounds like a crash. Could you make sure the process is running and provide us the server and system log?
-
Aktuell ist es nicht möglich 2 Webcams simultan anzuzeigen
-
Hallo. Du kannst deine Temperaturdaten in dem "blitz menü" in dem header darstellen. Dafür müsstest du die Datei /var/lib/Repetier-Server/scripts/hardware_info anpassen. Die Rückgabe muss im Format einer Tab-separierten Liste sein in folgender Rei…
-
Hello. I didn't understand fully your question. What do have printers to do with your network?
-
Hello. It seems that a lot of printers nowadays doesn't report filament runout to the host anymore. Could you tell me the results from The G-Code command M412?
-
Please make sure that you uncheck Repetier-Server during installation like here: https://imgur.com/a/8u15V0T
-
Sorry I didn't understand the question. What is it that you can't find?
-
Hello, currently I can't reproduce this issue. Which button are sou using? If you using "Upload and print" it not get stored in the group but rather added into the print queue and started directly. Does this issue also happen if you upload the gco…
-
Hello. You could try to set up a DNS server and assign those names to the specified IPs and/or change the hostname of your machine. To the Ultimaker: Please check your wiring and make sure everything is attached properly. Then try to print from…
-
Hallo, bist du dir sicher das der Port richtig ist? Wenn ja was für ein Fehler passiert denn? Kannst du das Verhalten schildern?
-
Du kannst Events mit dem Servercommand @event starten. Die Eventbezeichnungen findest du in der api doku: https://prgdoc.repetier-server.com/v1/docs/index.html#/en/web-api/websocket/events Bei Druckabbruch wäre es dann als beispiel: @event jobKill…
-
Please don't use those quotes around your commands. That will lead to invalid commands. Also if you want to pass through a parameter to cmd.exe please make sure to use the /C param before. Cmd1C:\\Windows\\System32\\cmd.exe /C C:\\Windows\\Notepad.…
-
Hello. In the next update the printer won't going back to the old position anymore, thanks for the hint!
-
hallo. Das syslog findest du im Verzeichnis /var/log/ Du kannst aber auch über ssh auf den Pi zugreifen und dir die Datei ansehen und herunterladen, das macht das ganze etwas einfacher. Das server log findest du unter: /var/lib/Repetier-Server/logs…
-
Du könnest einen cronjob erstellen, welcher bei einem reboot gestartet wird: https://www.pcwelt.de/tipps/Cron-Skripte-und-Befehle-beim-Boot-ausfuehren-9791090.html
-
hey, could you provide me the home assistant log?
-
Hallo, Ja mithilfe des Repetier-Server Monitor kannst du deine G-Codes, aber auch deine Druckerprofile und Servereinstellungen sichern und wiederherstellen.
-
Hello. Currently there is no way to start a timelapse recording while printing. This feature could be interesting though
-
Unfortunately, the Flashforge Creator Pro uses the sailfish firmware, which isn't supported. If you want to use Repetier Host, you may have to change your firmware.
-
Hallo. die extcommands befindet sich nicht in "Programme" sondern in "ProgramData". Hier noch einmal der vollständige Pfad: C:\ProgramData\Repetier-Server\database
-
Hallo! Danke für den Hinweis, das wird im nächsten Update behoben sein
-
Hallo. Der Repetier-Server überträgt grundlegend nur den Inhalt der Gcode Datei zum Drucker, genau als würde der Drucker von der SD Karte lesen. Dementspechend muss da ein anderes Problem vorliegen. Kann es sein das nach dem G29 der Drucker nochma…
-
Hallo. Das war nicht gemeint mit der seriellen Schnittstelle. Gemeint war das Klipper einen eigenen Socket bereitstellt. Dieser muss als Port ausgewählt werden. Die Verbindung sieht wie folgt aus: Repetier-Server -> Klipper Programm auf dem Pi…
-
If you are using our pi image the shutdown command is already implemented. Then just call @execute shutdown after your print job.