Repetier
About
- Username
- Repetier
- Joined
- Visits
- 2,072
- Last Active
- Roles
- Administrator
Comments
-
Settings are stored in Windows registry so complicated to recover. However slicer settings are stored on the hard drive. Where depends on the slicer you used. cura engine in work directory/cureengine and Slicer/Prusa slicer in AppData/roaming/slice…
-
Repetier-Host ist was anderes als Repetier-Server. Host ist nie als arm Version erschienen und 0.85 war die letzte OpenSource version davon. Ist aber auch nicht für pi gedacht zu wenig power. Server ist die aktuelle Entwicklung und auch für SBC geda…
-
Kannst du dich schon per PC verbinden z.b. weil du wifi über Handy eingerichtet hast? Dann versuche in Globaler Einstellungen->Terminal dich einzuloggen und dann startet repetier-setup Wähle 3 Touchscreen -> 5 Touchscreen Calibration Mit etwa…
-
Bambulab is planned for next big release 1.5.0. What monitor do you use? Some need extra settings/drivers which must match the linux kernel version. Only HDMI displays with eeprom providing settings work out of the box.
-
Beeing curious I burned a fresh image with pi imager using latest image from us (no modifications in settings!) and inserted it on a pi 3+. Ist started until interface appeared very shortly before doing the expected reboot. Then it came back showing…
-
Does repowering help? plymouth-poweroff.service is shutdown and that seemed to work, just the restart sounds to not happen here. If it comes up after repowering all would be ok I guess.
-
What did you do after burning image to sd card? On first startup image will adjust filesystem and reboot. Do not interrupt in that stage. Depending on sd card size and speed it can take a few minutes but after a while it should be running.
-
Disable easy mode in host to get all functions including log at the bottom.
-
Sounds like your marlin is handling out of filament with action messages. This is in deed limited to a few answers when the buffer is full. Then marlin can not accept any more messages and only local display works. Better solution if supported in y…
-
Prinzipiell kannst du externe Befehle aufrufen mit @execute, wenn die in extcommands.xml stehen und die benötigten berechtigungen haben. Da es aber schlecht ist im lauf während er den Druck beendet den Server zu stoppen könntest du "at" installieren…
-
Bei den Mega Boards ist es nicht möglich versehentlich den Bootloader zu beschädigen. Wenn der Upload klappt ist er auch da und firmware wird starten. Danach muss die Baudrate im Server mit der eingestellten übereinstimmen. Es kann sein das im EEPRO…
-
To add it run as user pi sudo echo "repetierserver ALL=NOPASSWD: /usr/bin/dfu-util" >>/etc/sudoers.d/repetierserver-perms
-
Looking into the code it actually calls dfu-util an external command so full path needed in sudoers list seems to be /usr/bin/dfu-util where it is located on my pi at least.
-
if it is in your path enter type dfu to see where the file is stored. I mean enter complete path starting with / to the dfu executeable. If it is not in linux path because it is in the klipper folder somewhere youe need to find where. In my klipper/…
-
There is no password for that user. You need to add dfu to list of sudoers. See file /etc/sudoers.d/repetierserver-perms how it looks and add one mor eline withh full path to dfu.
-
In such cases it helps to enable logging to see why this happened. It goes from connection to printer lost to corrupted file on sd card where a lot is missing so for the server it looked like the end, because linux says it is the end. Try downloadin…
-
KDIR="${HOME}/klipper" in the script is wrong here. Should be KDIR="${HOME}" when you use export HOME=/opt/klipper/ I think. that is already the klipper dir with klippy-env as subdirectory.
-
Ok, ja früher war das wo anders. Aber ich sehe keinen Grund warum das plötzlich keine IP mehr haben sollte. Das kann man dann nur durch analyse von logfiles und testen herausbekommen. Zuerst einmal neu rebooten und sehen ob er eine ip bekommt. Das h…
-
If it is a single color object you might also save as stl which has no such option, so object should get saved scaled I think.
-
Thanks for the information. Guess the string conversion is using your localization where , is used. Will fix it in the next release.
-
Die IPs stehen nicht in den Netzwerkeinstellungen, die stehen unter Einstellungen->Information! Kabel hat immer eine IP selbst wenn keine zugewiesen ist, Zumindest wenn wir von unserer Oberfäche auf unserem Image reden.
-
Wo kommt diese Fehlermeldung? Auf dem Browser wo du den Zugriff versuchst oder dem Touchscreen vom Repetier-Server? Auf dem touchscreen unter Einstellungen->Information kannst du die zugewiesene IP sehen. Ob die IP gleich bleibt oder nicht lieg…
-
Are you loosing connectop from browser to server or server to printer? For latter case check https://www.repetier-server.com/knowledgebase/connection-problems-with-printer/ Regarding filament sensor - do you mean it does not work in formware or de…
-
Funktioniert die manuelle Steuerung über den Server? Dann funktioniert die Kommunikation was aber vermutlich schon der Fall ist wenn du in der Konsole ausgaben siehst. Eiegentlich sollte es dann auch mit dem Drucken direkt klappen. G-Code im server…
-
Do you mean if you use a cura plugin to upload a gcode the server makes it twice in a row? What is if you save it locally and then upload to the server. Is the local file only one time code and uploaded single or double? This should be the same as …
-
Hab die Zeile gefunden ist bei mir aber ein kommentar mit ; am Anfang und kommentare werden nicht gesendet. Vermute aber das irgenwo zu recht am Anfang auch eine der Dateinamen mit gesendet wird und das dann den Fehler verursacht.
-
Kannst du den Teil zeigen den du meinst? Habe mal versucht zu reproduzieren und M486 A1mm_calibration.stl gesehen. Da es hier als Befehl erscheint muss es in den Empfangspuffer der Firmware passen, sonst geht es nicht. Wenn der Name zu Lang wird wir…
-
Das ist aber sehr ungewöhnlich oben die Scrollbar zu haben. Oben und unten wäre ok, ist aber sehr schwierig die gleich lang und synchron zu halten. Vielleicht verschiebe ich die Buttons nach links dann sieht die zumindest jeder. Am Handy wo der Plat…
-
Then it is not supported by your webcam and you need to rotate the image on the website like we do. Not all usb webcams support it. See help output of input_uvc plugin in mjpg_streamer: mjpg_streamer -i "/usr/local/lib/mjpg-streamer/input_uvc.so --…
-
Kann es sein das es eine ältere Server-Version ist. An das Problem kann ich mich erinnern, ist aber bereits seit einigen Versionen gelöst gewesen.