MartinD
About
- Username
- MartinD
- Joined
- Visits
- 9
- Last Active
- Roles
- Member
Comments
-
I am on latest repetier server version, and trying to connect to wifi router in direct visibility 2m away.
-
removed the latest dir I uploaded and tried to reboot server helped. (had to learn few linux commands ) Then I noticed even newer update which solves this issue. Issue resolved probably
-
Repetier said: Per folder is bad idea ince you can move them around and that changes no color. However you can change colors already if you add at start a matching server command to define color: @extruderColor #RRGGBBForces the G-Code …
-
For multicolor print I request to have option to set color of each nozzle per folder, something like INI file, lets say nozzle1={FF,00,00} nozzle2={00,FF,00} or another option eg - pick it up from the comment in gcode/3mf usually have these colors s…
-
Thank you, really appreciate it!
-
This is a gcode list in my project tab: https://i.imgur.com/799NLRq.png, notice the filename is not complete. There should be full filename (except maybe .gcode extension) and a icon to direct print (queue) the gcode. Issue for me is I have lot of …
-
Repetier said: At least for us a print that also caused bumps did print without now, so good luck. Hello guys, after update to 1.4.4 it looks like problem disappeared. Thanks!
-
Thanks, I will try to update it to 1.4.4 now and report if there are any issues. If there will be, then I will try to downgrade to 1.4.2 and report again if there are any issues. I am running on PI 4 with 2 GB ram, I have attached 1024x600 touch sc…
-
Back from vacation,I have the same issue on all other files. While I am printing through SD card everything is ok, as soon as I start to use Repetitier server - there is issue on each print. Is it possible to get back to 1.4.2? There is nothing wro…
-
I went on vacation, my printer is Prusa MK3s, everything was on default values did not change anything (Prusa has fw 3.11). Will try to enable logging and print something when I return back (on next monday)
-
Thanks for the update. Anyway I think 3MF from the Prusaslicer contains color per model already, so that I thought you can use. At least it works for me when I open 3mf file within Prusaslicer everything is set correctly including colors I set befor…
-
can this be done for waveshare 7" 1200x600 display?
-
Repetier said: Problem is how T codes are handled. See https://help.prusa3d.com/en/article/prusa-spezifische-g-codes_112173/#t-codes for Tx, Tc , t? I think you have Tx in your start g-code. That means select an extruder AT display - communi…