MartinD
About
- Username
- MartinD
- Joined
- Visits
- 5
- Last Active
- Roles
- Member
Comments
-
Thank you, really appreciate it!
-
This is a gcode list in my project tab: https://i.imgur.com/799NLRq.png, notice the filename is not complete. There should be full filename (except maybe .gcode extension) and a icon to direct print (queue) the gcode. Issue for me is I have lot of …
-
Repetier said: At least for us a print that also caused bumps did print without now, so good luck. Hello guys, after update to 1.4.4 it looks like problem disappeared. Thanks!
-
Thanks, I will try to update it to 1.4.4 now and report if there are any issues. If there will be, then I will try to downgrade to 1.4.2 and report again if there are any issues. I am running on PI 4 with 2 GB ram, I have attached 1024x600 touch sc…
-
Back from vacation,I have the same issue on all other files. While I am printing through SD card everything is ok, as soon as I start to use Repetitier server - there is issue on each print. Is it possible to get back to 1.4.2? There is nothing wro…
-
I went on vacation, my printer is Prusa MK3s, everything was on default values did not change anything (Prusa has fw 3.11). Will try to enable logging and print something when I return back (on next monday)
-
Thanks for the update. Anyway I think 3MF from the Prusaslicer contains color per model already, so that I thought you can use. At least it works for me when I open 3mf file within Prusaslicer everything is set correctly including colors I set befor…
-
can this be done for waveshare 7" 1200x600 display?
-
Repetier said: Problem is how T codes are handled. See https://help.prusa3d.com/en/article/prusa-spezifische-g-codes_112173/#t-codes for Tx, Tc , t? I think you have Tx in your start g-code. That means select an extruder AT display - communi…