Marco67
About
- Username
- Marco67
- Joined
- Visits
- 83
- Last Active
- Roles
- Member
Comments
-
(3923*4700)/(3923-4095) = -107198 (on my calc)...
-
Example: ADC is 3923, temp is 23° and R2 4K7.... RS? -107198?????????? I keep reiterating that being able to insert the ADC would make a custom table in an instant! :P
-
Repetier said: No and I'm not sure I will. But it easy to reorder the equation: adc = 4095 * rs / (rs + r2) now you have adc and want rs: rs=-(adc*r2)/(adc-4095) So you can compute resistance from adc value. What? I'm sorry but the …
-
There's a simple solution for this, implemented in MarlinKimbra firmware, i hope soon a similar solution in Repetier: M305 - Set thermistor and ADC parameters: H[heaters] H = 0-3 Hotend, H = -1 BED, H = -2 CHAMBER, H = -3 COOLER, * A[flo…
-
Try again with MarlinKimbra...
-
Hi Roland, no news about this request? I can't see anything about this in the configurator...
-
This is the program for erase the whole eeprom, and after this Repetier start without any issue, so please check where is the bug in your firmware: #include #define EEPROM_ADDR 0 // Slave Address 0 (A0=0,A1=0,A2=0) #define EE…
-
To reproduce the issue: 1) put all the parameters in the Repetier eeprom with the value "0" (with the server or the host) 2) flash Marlin 2.0 bugfix (the latest github version) 3) in this situation the M500 command it doesn't work and shows a "Writ…
-
#define TWI_CLOCK_FREQ 100000 it does not solve the problem. The only way I found it working is to erase (with all FF) the eeprom with a simple program.
-
The board in MK4Due is "1550.h": // I2C EEPROM with 32K of space #define EEPROM_I2C #define E2END 0x7FFF #define MAX31855_SS0_PIN 5 #define MAX31855_SS1_PIN 6
-
The video that show the problem...
-
Similar problem: https://forum.repetier.com/discussion/663/cant-acces-to-my-firmware-eeprom-configuration
-
Updated, tested and work fine now, thanks!
-
Repetier said: Does sending M355 S0 M355 S1 work and report the right light state? My guess is that the TOGGLE command does not work for due. In that case it would be interesting to see if M355 reports the state correctly, otherwise I would…
-
I use DUE board (RuRamps4D V1.3).
-
I've found the problem, the printer goes offline when i push the emergency button on Repetier Host, connected to the Server. After this i need to restart the server service.
-
In this situation if i manually restart the Repetier Server service the printer goes online...
-
2018-09-27 18:22:13: Connection started: Kossel MAX 2018-09-27 18:22:13: Reset printer Kossel MAX 2018-09-27 18:22:19: Port closed for kossel_MAX 2018-09-27 18:22:19: Connection closed: Kossel MAX 2018-09-27 18:22:51: Connection started: Kossel MAX …
-
I show you the steps loss in Stealtchop mode, with Repetier firmware. The movements I make are on the Z axis, so when the spider moves sideways it means that it has lost steps. With "M908" i can change the current for tests, but the new value can't …
-
nemesisde said: I still have some issues in stealthchop mode with diagonal moves (only one motor moves). The holding torque off the standing motor is to low so it starts to move. My mechanics are ok. Same problems here, i also use 0.9° motors…
-
Thanks Roland for reply. There's beta of this version 2? A date of the first release?
-
All my tests have been performed with the same configuration parameters, MK4Duo and Repetier use exactly the same values in acceleration, jerky, extrusion etc, everything is identical. The problem is also evident only by changing the printing …
-
Roland, when you think to release the server 0.90.0?
-
Sure it's comfortable if you have a professional probe thermometer, like me. For example this is the ADC value at some temp here: Temp / ADC 178 754 192 588 204 473 Etc. etc. With this value i can easy create my thermistor table in a …
-
Roland, please, I already wait this implementation! The possibility to insert in the on-line configurator the ADC value read with "M105 X0" command in the "User define thermistor table" instead the resistor value, thanks! Read the ADC is easy with a…
-
Damn it, but there is already this function, I only saw it now! Excuse me...
-
Thanks, mail sent.
-
Nice, please leave me an email address, on your site I don't find it for this kind of thing.
-
No, timelapse disabled.
-
Two news, one bad and the other nice. Tried with "OctoPrint SD", i've only installed Repetier Server for Armel (with dpkg) and recovery my backup from "/var/lib/Repetier-Sever" of my other "Repetier Server SD", same printing issue, but if i print wi…