Marco67
About
- Username
- Marco67
- Joined
- Visits
- 83
- Last Active
- Roles
- Member
Comments
-
DAMN! I'm sorry, the problem is here again! Now i try to install a fresh copy of Repetier Server on Octoprint SD image...
-
Hello Roland, i inform you that I renamed the file "/usr/local/Repetier-Setup/bin/manageWifiAccess" (simply add an underscore at the end), reboot my Raspberry PI 3, and now the problem has disappeared! So i can confirm, the problem is the wifi netwo…
-
Ok, installing now Repetier Server on Octoprint SD image, i keep you informed.
-
The streaming is good if you point directly to the MJPG streams cam, but inside the Repetier Server interface there's a lot of lag. So the problem is inside the web interface not well developed, not in the streaming.
-
No, i use different SD image, your and the SD image for Octoprint downloaded from their website.
-
Roland, have you a board with Smoothieware installed for some tests?
-
+1 Smoothieware is not well supported by Repetier Server. Also missing the ability to edit the "config.txt" inside the MicroSD, because the USB is not mounted as "mass storage" like in Windows. And the "smoothieware.xml" is not well compiled with th…
-
Problem not solved here, is not related to the wifi access point, damn! Tried other print object from SD and with Octoprint, no issue. When you think to release a new version of the server, also in SD image format?
-
It would be interesting to save on SD these statistics, to avoid unnecessary EEPROM writes.
-
Simply disable the access point from menu here solve the problem. Next release..... when? :-)
-
I tried OctoPrint and haven't issue during printing, so it's not the fault of the Raspberry, cables or the printer board, is a software problem.
-
And I don't understand why every 12 seconds this thing is repeated in the log, ever. Server version: 0.80.3 Pro. 2017-03-25 20:37:04: Activating access point 2017-03-25 20:37:41: Activating access point 2017-03-25 20:38:18: Activating access point…
-
Ok, i agree, thanks!
-
Here the fix by the developer of this board: https://github.com/brupje/Repetier-Firmware/commit/2693eea1fba3caefb942fc6d7549f666c2f64378 Ask to stay aligned with him, since this board has great potential but is not emphasized, especially the supp…
-
It's a very good system, I tested thoroughly on my Kossel XL with "MarlinKimbra" firmware and I assure you that in a few minutes you have the Delta fully calibrated with a minimum dimensional error. This system helped me a lot to find some precise m…
-
Awesome, thanks Roland, now work superfine! If you possible please explain me if this affects print quality or speed. I think 20 is a good value for a Delta, why it doesn't add as default in your Configurator for RAMPS?
-
My config: https://drive.google.com/file/d/0B3HEcrNCOga9aGltd3RSR2FhQkk/view?usp=sharing The video that show the problem:
-
Same issue here today with "TriGorilla" board (RAMPS compatible) and LCD2004A. After some minute during printing the LCD start to show random characters, and after other minutes appear two square files and nothing else, but the printer work fine wit…
-
With Marlin all this calibration are full automated with "G30 A" command with 7 probing point, also the z-height. I hope in a future this code inside Repetier... ;-)
-
The error: C:\Users\Marco\AppData\Local\Temp\build4484802863840003197.tmp\Printer.cpp: In member function 'int32_t Distortion::correct(int32_t, int32_t, int32_t) const': C:\Users\Marco\AppData\Local\Temp\build4484802863840003197.tmp\Printer.cpp:26…
-
Try with this "Configuration.h", created with the on-line configurator. If i disable the "DISTORTION_CORRECTION" i can compile without problems, but dunno why: https://drive.google.com/file/d/0B3HEcrNCOga9NmpZM3Bxck1pbUk/view?usp=sharing
-
You mean to remove the diode D1 or there's a pattern?
-
Ok, now i understand the real problem, thanks! Now, since i need to have stable 5V external voltage that can inject and remove the Arduino voltage regulator? I thought that by connecting the BEC to the endstop V pin of this was done.
-
Hi RAyWB, thanks for reply. I know this problem, so now i've installed an external BEC with a stable voltage "5.00V" connected to the endstop VCC, but i prefer tune my thermistor with a personal table. So if it was possible to enter the ADC value fo…
-
Yeah, i don't mean "disable the display" from the code, i'm sure this can improve performance, i mean "the code must disable the display when not used". During printing i don't look at the display for hours... ;-) Cellular phone use this trick to sa…
-
I agree about Arduino Due, but why i can't get pause with the "Smartcontroller LCD" (low res) also at 200% printing speed? So the problem is the processor computation with the "128x64 LCD" and delta printer, for this reason i ask to implement a sort…
-
Switch back to the other "low-res lcd", problems disappeared. Now, i verified that, raising the print speed to 200% still experiencing slow issues like in my video (not good), also without touch the rotary switch, the LCD still requires too many res…
-
It would be interesting, i support this request.
-
I mean the day, hour and minutes when the print is started, example "27/12/16 at 12:05".
-
Ok, missing the step 6, thanks! Anyway why the installation package of Repetier Server, like the newest 0.80.3, it doesn't install this config scripts for mjpg-streamer and cam resolution automatically?