Arnold
About
- Username
- Arnold
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
Hello, i give up with Z-Probe. For me it looks like it don´t work at all. After i made bed-leveling the extruder is more hiegh as i don´t use it. without bed-leveling: extruder distance 0.06 mm. with bed-leveling: extruder distance 0.3 mm. e…
-
WIth Repetier Host V2.1.3 i get many errrors if i do G32 04:24:46.675 : Exception during socket read:Der Index war außerhalb des Arraybereichs.04:24:46.675 : {"callback_id":-1,"data":[{"data":{"id":16330,"text":"Z-probe:6.407 X:139.60 Y:19.99","tim…
-
Hey, after autoleveling i have this values. Why is Z-Probe 5.x or 6.x. I would expect that it is Z_Probe_height(0.8) + tollerance. 4:01:27.417: Z-probe:5.785 X:10.00 Y:19.994:01:31.899: Z-probe:5.918 X:10.00 Y:55.994:01:36.437: Z-probe:6.052 X:…
-
Now i tried to print with Repetier Host the Test Cube. Suddenly the Printer is going to Autolevel with strange settings and crash again on x_max. Are you sure the z-probe is realy working ?
-
Strange. If i setup Probe P3.X to 170mm then it would be still 40mm left for the next probe. But if i setup P3 to 180mm then the x position crash to the right limit of x.
-
In my thinking this is to complicated. The folowing settings would be enough to setup z-probe. 1. Z-correction size. (XMin,YMin/XMax,YMax). Then the System know where are the ranges for the Probe 2. X/Y-offset of the Probe and GridSize with thi…
-
Hello again, its ok. in configuration.h i still can change the setting. Only on the webpage configuration this setting is gone. thanks