GDM60
About
- Username
- GDM60
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
Hmmm, Maybe host should be improved by showing both the connection to the server and the connection through to the printer. I suspect though that host doesn't actually know that the printer is actually connected so my suggestion could be difficult. …
-
I worked through the RTS/DTR combinations while trying a manual move from the server - while monitoring through the console. Some seemed better but none gave proper control. I then read another post (Repetier-Host, Connection Problem, Marek33, https…
-
You are indicating that everything is correct and that the printer should be responding to the commands. This is my point: under this condition the printer is not accepting the commands and temperature status values 'returned' are not applicable. Se…
-
Still having problems so I have investigated further: - the PC reports the COM port correctly (COM11) and lists it as Arduino Due - R-Host reports the extruder temperature as 0.0C/off, bed temperature ads 0.0C/off (both should be ambient ~21C) - …
-
Further to the above I powered the printer off and then on after 2 minutes. The initial lines in the log are 11:28:47.242 : M2011:28:47.243 : Connection closed by os.11:30:49.976 : Connection started11:30:49.981 : M2011:30:50.082 : Dtr: false Rts: f…
-
Hi, For the last week or so the printer has worked well with several objects being printed and the communication are solid and reliable. Today, I again have the situation where commands get a response of 'Warning: Seems like we missed a OK - contin…
-
Thanks for confirming the site is behaving as you expect. I have tried Google Chrome again after looking through all possible settings but it still doesn't commence the download so 'somewhere' it must be applying a filter as you suggest. I have tr…