Micha72

Comments

• Thanks for your answer. I will run a few tests once the current print job is finished. Maybe ... not sure though ... it was a problem with the sensor itself. The current design of the sensor on the MK3S is not the best.

  in Prusa Filament Sensor Comment by Micha72 December 2020
• Ok, started looking around for the Prusa 95% flow-thing on the net and found many answers. Just one thing... when printing from SD the web-GUI doesn't reflect the 95% change. That would be great to have so no one gets confused.

  in Upon start of print - flow jumps to 95% Comment by Micha72 November 2020
• Ok, so basically that is an internal Prusa thing? That's somehow weird. While (almost) every data from the printer shows up in server even when a print is started from SD-card, the 95% flow-thing is just visible in the printers menu (tune -> flow…

  in Upon start of print - flow jumps to 95% Comment by Micha72 November 2020
• Alles klar, danke. Sobald das Update raus ist, werde ich testen.

  in Ver.0.94.3 Pro, Fehlerhaftes Verhalten nach Ausschließen G-Code Comment by Micha72 November 2020
• Metric is quite hard but I would suggest having more than 10 timeouts per print should show the modal and inform the user as soon as the threshold is reached with a simply modal window in the browser and whatever solution fits on the display. Maybe…

  in Warn user when getting a certain amount of communication timeout warnings Comment by Micha72 September 2020
• It would also be great to have the option to automatically translate the M600-command into a @pause on the fly during printing. In that case all the M600's inserted by prusaslicer for color change would result in processing the custom gcode for the …

  in "@pause" Command Comment by Micha72 September 2020