p_vnct
About
- Username
- p_vnct
- Joined
- Visits
- 9
- Last Active
- Roles
- Member
Comments
-
Hello, First apologies for the very late response, and thanks for your replies. I had to roll back as this setup is my production environment and this issue disapeared directly after this roll back. About duet web panel, when i was using the 1.…
-
Hello, i can't provide full gcodes log publicly and i don't think gcodes are the issues as all the gcodes were running without problem with Repetier server 1.4.2 before the update. - is there a way to download back this 1.4.2 version and roll back …
-
you can do that with iframes in a web page
-
@rpfaff Yes with the pro version in the settings under connectivity tabs you can add an alternative server for each pis - just set it to your master. But i finally i don't use projects to print files, as each time you will print a file from a proj…
-
Some news after a bit of search. Sudo rpi-update do not solves this problem with the rpi-image provided . So i ended up installing Ubuntu Mate 16.04.2 on my RPI3B+ then i have installed the armhf.deb and now no more USB connection problem! Jus…
-
hmmm.. weird thing. I have already ran dmseg and i get an old error message "No host channel available for periodic transfer" , i have searched a lot why i have this, and the only thing i have found is that it should had been fixed for a long tim…
-
Here are some logs from another server where i cannot connect more than 2 printers at the same time. The issue here is the same - it's like the 3rd printer i try to connect is not plugged in . so it never connect. I am wondering if the problem …
-
So i am 100% sure that the 4 configs uses different ports. I can active each printer one by one (and only one at a time) without any problem. Then if i activate 2 or 3 printers - no matter which ones - it works. But as soon as i try to connect …
-
Yes they are - that's what i try to explain from the beginning . Apologies if my english is far from perfect
-
Ok i will give a try as i see the 4 printers with different ids and path. But still i think linux is not the problem here as i was setting up a second servers this morning for other printers and i have the same problem but now beginning at the 3…
-
for now the printers are connected by-id. And i have already verified that i always see the 4th printer with a different id in this type of connection. So You advise me to try connect all of them by-path ?
-
No it does not work, and that is weird ! and yes of course i have verified and i see the 4th one when i connect it to the RPI To explain more precisely Let's say i have: - printer 1 - printer 2 - printer 3 - printer 4 If i connect printer 1,…
-
Thanks for the insights, I have finally find a way to do almost exactly what we need. For the people who might be interested here is exactly what i have done : So i use a router (an old linksys wrt54g) that i have flashed with DD-WRT firmware,…
-
Thanks, So i am trying to setup the repetier server network, I use a mac book pro late 2011 as the master PC, for testing purpose there is only one pi directly connected on the macbook pro ethernet port. I am planning to use a multi-ethernet po…
-
Thank you for your response and advices, So i think that for reliability purpose we will not use webcams, we don't really need them. I will bundle 4 printers (same model as advised and it makes sense) per rpi and with a master PC to share gcode…