aschneid
About
- Username
- aschneid
- Joined
- Visits
- 9
- Last Active
- Roles
- Member
Comments
-
ok I figured it our. apt was too quite with the -qq params seems like there is a new dependency to libusb-1.0-0 that was not met. Therefore it did not install properly. So adding this worked fine: && apt-get update \ && apt-get…
-
If I just sleep as CMD I see there is no /user/local/Repetier-Server folder at all. during image build it seems that it immediately gets uninstalled again ( see last two lines ): Step 3/9 : RUN wget --output-document repetier-server.deb -q http://…
-
thank you for digging into this! looking forward to the next release
-
Same for http over 80 so does not seem to be SSL related. Any logfile I can look into that might get some insight? SSL Cert is letsencrypt so not self-signed. server { listen 80; server_name repetier..de; client_max_body_si…
-
that fixed the not rendered previews, but my timelapses are still not rendering. I left it running for a couple of days now with no success. If I hit "recreate" for a specific timelapse, it tells me there is one open background process running, but …
-
Also affecting the Previews:
-
it is set to /usr/bin/ffmpeg and that exists: pi@Repetier-Server:~ $ which ffmpeg /usr/bin/ffmpeg pi@Repetier-Server:~ $ ffmpeg -v ffmpeg version 3.2.12-1~deb9u1+rpt1
-
I had the same issue, was also noticing that the touch UI only would come up after ssh to the machine. So I set it to commandline with autologin and it worked since then...
-
that worked, seperate setting would be nice though. Having manual Moves at 450mm/s is quite fast for manual control
-
is the current v14 image based on stretch?
-
@RAyWB thank you! Was not aware of that... the movement system does sound very interesting though! However it is still alpha and only for cartesian if I read correctly, no LCD no config (yet) but certainly something to keep an eye on!
-
did not help, I set both retraction distances to 0 to make sure. It goes to Photo position, returns to print part, retracts about 50mm and then resumes printing. Any other ideas?
-
I have Retraction Distance of 3mm and Retraction Distance Long of 40mm (not sure what this is for?) I try change them and see if it helps. Currently still printing w/o timelapse...
-
repetier Firmware v2? the latest stable is 1.0.3 and dev is 1.0.4...
-
Hatte das Problem seither nicht mehr und nach dem Update auf 90.4 ist die Temperatur auch “da geblieben” Darf man also vermutlich als gelöst betrachten!
-
zur info; ein paar restarts des PI später ist plötzlich die Temperatur vom Heatbed wieder da... Ob das jetzt so bleibt kann ich aber nicht sagen
-
just for completeness sake; #define EXT1_TEMPSENSOR_TYPE x should also be matched of course... works fine with these settings! Thank you for your superb support!
-
Wow that was fast what about #define EXT1_HEATER_PIN HEATER_2_PIN should I set that one to HEATER_0_PIN too? would be brilliant if the config tool could handle these things though but I guess you are busy with 2.0 right now...
-
An approximately ETA would be appreciated...
-
same here, I just moved my PI from octoprint to repetier-server since it now has to control two printers but unfortunately the Turnigy Fabrikator v2 which is a malyan M100 won't connect. There also does not seem to be a workaround like there was in…