cinhcet
About
- Username
- cinhcet
- Joined
- Visits
- 3
- Last Active
- Roles
- Member
Comments
-
yes, Ubuntu 20.04.If I remember correctly windows did not have this issue, but that was 3 years ago. Should I test with a new version of the server?
-
This solved it only partially for me. I now got another error (at least repetier was not crashing anymore) libGL error: MESA-LOADER: failed to open iris (search paths /usr/lib/x86_64-linux-gnu/dri:\$${ORIGIN}/dri:/usr/lib/dri)Googling the error sugg…
-
on my other machine with ubuntu 16.04, version 2.1.6 works fine, no crashes. Now the question is if it is my specific installation or ubuntu 20.04 in general.
-
Yes, I can start the manually downloaded Slic3r and also the slicing works. If I try PrusaSlicer, it at least opens, but if I close it, it crashes too:Unhandled Exception: System.NullReferenceException: Object reference not set to an instance of an …
-
yes, linux (ubuntu 20.04 as written, kernel 5.8.11) I am using the appimage (which includes slic3r.I also tried installing slic3r separately and then configuring repetier to point to this installation. Same error.
-
Since I am able to reproduce the error consistently, I can test whether this fixes it, if you want.Steps to reproduce:- Add another screen to the pc,- open repetier- move repetier to the new screen- close repetier- disconnect the screen- try to open…
-
sorry, fixed it, I just deleted the values.xml in the window folder of .mono. Sorry for the spam. I think I know now why this might happened. Normally I have multiple screens connected to my laptop, but this time not. Therefore these values are out …
-
Filament visu settings https://github.com/cinhcet/3DPrinter/blob/master/filamentSettings.png Screenshot https://github.com/cinhcet/3DPrinter/blob/master/repetier.png That one line from the object to the origin is the artefact. Log at startup: 18:1…
-
https://github.com/cinhcet/3DPrinter/blob/master/origin.gcode I have to say that this gcode in general is a little bit strange, since the outer perimeter was printed faster than the two inner ones.... It was a stl file from thingiverse, sliced with…
-
Had the same issue a few times. I was never able to found that path in the g-code, so I decided to print it and it also did no strange movements. How can I send the file?