ProfDrYoMan
About
- Username
- ProfDrYoMan
- Joined
- Visits
- 8
- Last Active
- Roles
- Member
Comments
-
Thishttp://skjm.com/icam/mjpeg.phpcan help you finding the correct URL for the IP cams.Or it help's you to choose one.I will try this one https://goo.gl/OYG2CU
-
Ok. A DTR toggle resets on the hardware side. I got a Ramps-Clone from Anycubic (Trigorilla).Is there any way to "fix" this? Using Repetier-Server does not help, because there is no computer running all the time and Repetier-Server needs to connect …
-
Resolved. I do not know, what I did wrong.
-
Yes. And it worked REALLY great. No need for autolevel afterwards and also no need for distorsion correction. All my 10 testpoints are
-
And if you add and substract from the power position angles (in my case 120°) you will be able to use the wizard in any orientation of your printer. Thanks to David from escher3d for this fast answer.
-
Hello, I just want to tell that the escher3d-Method done for 6 factors with 10 points worked fabulous for me. Error down to 0,03 mm! Four iterations and it was done. One pitfall! The method expects the angles to be 210/330/90 otherwise it would n…
-
Well, as I expected. The Chinese call it NTC3950, but it might be anything. For me it would be great to see real absolute temperatures. If I switch the printer it would be good to know the temperatures for the laminat as absolute values. Therefor…
-
Nobody? Too bad.