kkberg
About
- Username
- kkberg
- Joined
- Visits
- 59
- Last Active
- Roles
- Member
Comments
-
I have same problem and even if I change to high-low, connection is no longer stable on my skr 1.3 . Old settings are there but problems. It worked perfectly until the update. Now printing from SD-card. Don't know how to fix it.
-
-
Repetier said: We updated the installer for windows with a fixed version. Should now work for every one. Thank you I works properly now. (Sorry for late reply)
-
I made an update from running system and the files where defenitely gone!! i put in my backup files and it worked again. Updating to 0.93.0 was without any problem. By the way I'm using SSD's on my Pi's since a long time, because of wanting a more s…
-
Both, on touchscreen and on PC with Firefox
-
Okay, scheint niemanden zu interessieren, oder nur ich habe das Problem mit iOS.
-
Der Link wird immer mitgesendet, damit sofort auf die Cam zugegriffen werden kann.
-
Thank you very much. I have to use /dev/v4l/by-path/ and then both cam's usb-ports show up. Kind regards Klaus
-
Only for clarifying, webcam's are the same and I also used an active hub to have no powerloss. Also both cam's work on another Pi with mjpg-streamer very well.
-
solved with 0.90.1
-
Vielen Dank, ich habe schon eine andere SD Karte bereitgemacht und teste
-
okay, thank you. Also a good idea and I give it a try.
-
got it to work with thread https://forum.repetier.com/discussion/comment/17392/#Comment_17392
-
sadely doesn't work at all. I tried Drucker_Strom_an sudo /home/pi/raspberry-remote/send 10101 1 1 Drucker_Strom_aus sudo /home/pi/raspberry-remote/send 10101 1 0 also tried …
-
Thank you, I'll test it. User repetierserver is in sudoer.h as user with no password already integrated. Thanks again and I'll give some feedback. Klaus
-
Hello, I've the same request for wireless power connector to be implemented in Repetier Server. Is there already a workarround available with a script? Kind regards Klaus
-
Vielen Dank, das war es. Einwandfrei.
-
Solved, problem was the guy just infront of the screen. I missed that my 7" screen has 1024 X 600 pixel. My setting was 800 X 600 which seems not to be working with Repetier Server.
-
I did this correct, also the hdmi section. I got it tor un with Octoprint some month ago. Thanks you for your comment
-
My new Raspberry arrived and it directly connected to my network via ethernet and wifi happy again
-
seems that my Raspberry has problems with the wired network connector. I claimed this at the vendor and will send it back.
-
I now configured wifi manually over sudo nano /etc/network/interfaces when hooked up over internal wifi. Wired connection still doesn't work. I don't know what it is. For the moment it's okay for me and I can give it a try as soon as my printer is s…
-
I give up now :-q
-
Pi now got an IP but I'm not abele to connect via browser or ssh. Here you can see the wired MAC and IP on my Fritzbox. Ping also doesn't respond. I'll investigate more today.
-
wired connection doesn't work either. Don't get an IP via DHCP! I use a Pi 3 Modell B