dmkmedia
About
- Username
- dmkmedia
- Joined
- Visits
- 56
- Last Active
- Roles
- Member
Comments
-
ok here is a video of whats going on i hope you can pull something from it also config file attached
-
i get X:10.00 Y:0.00 Z:0.000 E:0.0000after sending M114
-
but its this error i dont know what's causing it after the first probe in G32 S2 i get T:15.09 /0 B:9.46 /0 B@:0 @:0 T0:15.09 /0 @0:0 T1:14.74 /0 @1:0fatal:G32 leveling failed! - Printer stopped and heaters disabled due to this error. Fix error and…
-
well i click the home all button and that works ok then i type in G1 X30 Y10 and it dont move but i have typed in G1 X30 Y20 then it did so I assume once it homes its already at G1 X30 Y10
-
anyone can help on this please as the printer is ready to go but i cant use it without help guys
-
im now getting busy:processingX:20.00 Y:20.00 Z:0.000 E:0.0000busy:processingbusy:processingbusy:processingbusy:processingbusy:processingbusy:processingbusy:processingbusy:processingError:Z-probe failedError:Probing had returned errors - autoleveli…
-
the [roblem i have is i but it didnt move anywhere and didnt helpuch an small bed for a big frame when the end stop activates on the Y-axis i have to then move 150mm to reach 0 on the bed and X axis has to move 20mm to reach 0 i tried G1 X30 Y10 …
-
where is this setting
-
dmkmedia said: sorry for the delay in replying i was waiting for new materials for the new build but i am still getting the error i have attached the latest config i set it as 45 as told but still the same error #define Z_PROBE_X_OFFSET 35#d…
-
sorry for the delay in replying i was waiting for new materials for the new build but i am still getting the error i have attached the latest config i set it as 45 as told but still the same error #define Z_PROBE_X_OFFSET 35#define Z_PROBE_Y_OFFSET…
-
G21 ;metric valuesG90 ;absolute positioningM82 ;set extruder to absolute modeM107 ;start with the fan offG90 ; use absolute coordinatesG28 ;move X/Y to min endstopsG32 S2M82 ; use absolute distances for extrusion my bed…
-
did you get a link for this i cant find it
-
by the way i know y is set at 400 at the mo but i have been trying various settings and none so far have worked
-
PDF didn't attach so here is an image of the points
-
ahhhhhhh i see sorry i am used to using raspberry pi as you can tell.
-
i dont know what i did but it is now showing
-
its an mks gen V1 and it seems that when the first hot end is powered up it also powers up the second one so i have disconnected it for now
-
i just put a multi meter on the second heater and when i turn on the first one both of them power up
-
#define SUPPORT_LASER 1#define LASER_PIN 5#define LASER_ON_HIGH 1 also, the laser kicked up when i hit it with 12v. so how do i tell the software i want to use the 3d printer then after engraving the model with the laser. can this be done in one p…
-
/* This file is part of Repetier-Firmware. Repetier-Firmware is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of …
-
the laser i got from a laser engraving home build kit but dismantled it a few months ago for spare parts . but i kept the laser is this one https://www.banggood.com/445nm-2_3W-2300mW-Blue-Laser-Module-With-Heatsink-For-DIY-Laser-Cutter-Engraver-p-11…
-
spot on working fine thanks so if i wanted to go to 32 sub steps would i benefit from it as i do have the ability
-
this is the one i got from amazon https://www.amazon.co.uk/gp/product/B06WRN1DQS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 lead of thread(8mm) which is the distance of the nut to rotate a circle. Screw diameter: 8mm/0.31". Length: 100mm(3.94…
-
tried that and it doesn't work both sensors are fine. i think it's a board problem wond'nt mind its only 3 months old this one
-
do you know what the pin numbers are ?
-
in my start up gcode i have G21 ;metric valuesG90 ;absolute positioningM82 ;set extruder to absolute modeM107 ;start with the fan offG90 ; use absolute coordinatesG28 ;move X/Y to min endstopsG32 S2M82 ; use absolute dis…
-
i did select the correct thermistors and this has been confirmed by E3d over the phone i am changing my board tomorrow as i think my board has a problem
-
yes i solved it i didnhjt see use the heatbreak correctly now it all set up fine. on my V6 thanks guys
-
found out why i cant heat up my hot end.. it was too close to my heat sink
-
is it just me or if you have 2 extruders they apear side by side and not underneith each other like on the last version