eeerfan
About
- Username
- eeerfan
- Joined
- Visits
- 11
- Last Active
- Roles
- Member
Comments
-
Repetier said: See github answer. thank you so much.i do it with your help.
-
eeerfan said: photo is that: if you cant see picture .you can see my question on github/repetier issu/full graphic smart controller failure
-
photo is that:
-
Repetier said: Can you show what you mean? Make sure the cable is shielded and does not get near heater/motor cable or it might modify some bits if they are powered. when i use repetier configuration tools on your website and config the …
-
Repetier said: Do NOT add u8glib that is not needed and depending how you did it might cause more problems. #define FEATURE_CONTROLLER 11 would help much more. Type 2 is reprap discount character display. i do the works that you tell me…
-
drv 8825
-
based on this tutorial: StepsPerTurn = 400 // Most stepper motors have 0.9 Degree per step BeltDistance = 2.032mm // Distance between repeating grooves. GT2 belt = 2.032mm GroovesInPulley = 10 // 8-10 are common values---> FOR ME IS 10 Substeppi…