Nostromo_2000

Comments

• Agree with you. OK. Data from EEPROM:   Extr.1offset  X 0, Y 0, Z 0. For rotation form autoleveling, if you mean rotation for towers they are A  210, B 330,C 90. Yes enstop offset is executed first  after homing. Sanguinololu 1.3b. Firmware Repetier…

  in X Y stepper disabled after movement Rostock delta Comment by Nostromo_2000 January 2017
• Did i done something wrong? Long time no answer.

  in X Y stepper disabled after movement Rostock delta Comment by Nostromo_2000 January 2017
• This is link of my configuration file I hope it will help. Hotend is centered. This behavior is noticed if movement is less then 10mm. If something want to make correction, it will be also done after 10mm movement.  https://www.dropbox.com/s/i8zhywp…

  in X Y stepper disabled after movement Rostock delta Comment by Nostromo_2000 December 2016
• Now changed assignment in configuration.h, and revert to old pins in pins.h. ENDSTOP_(X|Y|Z)_BACK_MOVE   5   5   5Reduction factor 2nd test      3     3    3ENDSTOP_(X|Y|Z)_BACK_ON_HOME  10  10  10After homing there is 8-10mm space between carriage …

  in X Y stepper disabled after movement Rostock delta Comment by Nostromo_2000 December 2016
• Hi again,Finaly Stepper holds possition after movement I have excange  E0 and Z connectors. In  pins.h I changed lines with:#define ORIG_Z_STEP_PIN         1   #define ORIG_Z_DIR_PIN             0   #define ORIG_E0_STEP_PIN         3  #define ORIG…

  in X Y stepper disabled after movement Rostock delta Comment by Nostromo_2000 December 2016
• Thanks for quick response.Nice solution.

  in X Y stepper disabled after movement Rostock delta Comment by Nostromo_2000 December 2016