CharlesMakeAll
About
- Username
- CharlesMakeAll
- Joined
- Visits
- 28
- Last Active
- Roles
- Member
Comments
-
Wow, that makes sense and is easy to do! I'll give that a try, thanks!!!
-
How you helped (VERY MUCH APPRECIATED) was in having me revisit all the settings, where I stumbled upon the 68mm offset for ext2. Too much of a coincidence that the 3rd extruder offset was exactly the distance I was having a problem with. So, than…
-
Thank you VERY VERY MUCH for helping me with this problem. I had no idea what was going on. I did figure it out. Turns out it was the settings for the extruders. I setup 3 extruders with ext0 having 0 offset, ext1 having 34mm offset, and ext2 ha…
-
Thank you again for your help. Please let me understand If I have this right. I am building a CNC Mill - 3 Extruder - Laser combination machine using the Rumba board. The machine is set up like this: CNC mill, Extruder 0, Extruder 1, Extruder 2…
-
Thank you for your answer. If I may clarify, this means that if I use only one extruder, extruder 0, then both the CNC mill and Laser will use the position of extruder 0. If I then add a second extruder, extruder 1 with an offset, that the CNC mil…
-
I tried 64x64 and that didn't work. There is something I'm missing. I am running a 64x64 monochrome bitmap through LCD Assistant and pasting the resulting output into logo.h being careful to maintain the original programming. Just pasting over th…
-
Thank you, that did it! Easy to do when you know what to look for and impossible to do if you don't. Thanks again!
-
Excellent, Thank you! Very good information. Much appreciated.
-
Thank you again for your help! I very much appreciate it. This has been very helpful. I have a follow-up question I posted as a new discussion, "Clarification needed on "High Pin Enables" when setting up Laser/CNC in Repetier firmware". Which I…
-
Thank you for your reply. I am using a RUMBA and possibly the pwm for the 3rd extruder heater can be used but it sounds like trying to integrate this with Repetier is way more trouble than it's worth at the moment. possibly in the future.