amigoloko
About
- Username
- amigoloko
- Joined
- Visits
- 17
- Last Active
- Roles
- Member
Comments
-
Repetier: SSID names are as simple as Network 1, NETWORK2, etc. Passwords are a different story, in fact, use on a single password: $#@. Re-tested, once got rid of special characters on the password, the connection was possible, (not with WPA Algo…
-
Freash install with Image V18 with Repetier-Server 0.92.2 - It does not work out of the box. Yet, this procedure "Problems with Access Point" at https://www.repetier-server.com/knowledgebase/wlan-configuration-on-sd-card/ -It does give an option …
-
Fresh install with Image V18 with Repetier-Server 0.92.2 Same issue. tried to modify: /boot/repetier-image-setup.txt. on the previous version did not work ill try to modify with this new version..
-
V.17 working WiFi, thanks Repetier Team (also usb is working ) as soon as first time on, the AP menu for region will not load, just switch languages, and it loads correctly, then you can choose the Region, for it to let you to accept clients, or co…
-
Same here, not yet able to connect to WiFi, I cannot get to ssh since no ip/connection is established. tried V15, V16, (if manually update from server (web interface v.91 to v.92 there seems to be no issues with WiFi) but fresh burned image to sd o…
-
amigoloko said: Repetier said: Interface was designed with wide screen in mind, so we only have have breakpoints for the common wide screen resolutions. You can download the sources for the printer frontend and modify the sass main con…
-
Repetier said: Interface was designed with wide screen in mind, so we only have have breakpoints for the common wide screen resolutions. You can download the sources for the printer frontend and modify the sass main config and add your resolu…
-
It might have to do with css right? any easy way to migrate to 480x800 (instead of 800x480)
-
Resolution 800x480, once rotated (90 degrees), we are looking for the interface to show 480x800
-
ok let me check this, i will try to replicate, and catch the time, and/or setting for the timeout.
-
On Repetier 1.5.5 Still happen,Now i do press the "OK" button and it continues to print, but still there. let me test the 1.5.6.ill back to you.
-
Dear @Repetier Vibration limit is the cause of the G4 commands. it seems that the algorithm used on the new slic3r determines that with a 3Hz vibration limit need to pause. nor on the slic3r 1.1.7 thanks for the help. By the way, i am now testing …
-
Dear @Repetier Let me test this. by now i can assure you this is strictly a slic3r 1.2.9, i have managed to print with any g4 commands added to the code on the Repetier 1.5.5 with slic3r 1.1.7. Even with the Vibration limit set to 3Hz, on the 1.1.7 …
-
Here are the two files i tracked, both are the .inicould not find the G4.Path: C:\Users\UserX\AppData\Local\RepetierHostslicer settings.inislicer.inihere is a picture of the gcode extra code, nothing there: picture and this is the .gcode with the G4…
-
Terrific, let me test this, will back with testing results... Tnks
-
no, but once in a while i got the same problem, using marlin, arduino mega,
-
Dear @Repetier it used to be a post regarding this, it seems that you cleaned everything, i still have this problem, as you already give me the clue (a G4 dwell command) on the gcode)i still could not find why Slic3r is adding this commands every ra…
-
@Repetier tnks
-
Dear @RepetierSupport , could you specify which Repetier Mac version is equivalent/similar to the Repetier for Windows .95F. Equivalent in the meaning of features and communication protocols and sequence. i am a .95F user, and i need a good, stable,…
-
Discard the last part i have notice the G4 commands, the question is still there, on repetier 1.0.6 the printer does not pause/wait.as soon as the repetier 1.5.2/1.5.3 the printer pause/wait, same slic3r.
-
@Repetier if the G4 pause command is there i did not add it. as i have told you, the code works well on the 1.0.6 Repetier but on the 1.5.2/1.5.3 the slic3r is the same when it fails and when it work well. slic3r 1.1.7.So how will Repetier affect t…
-
the are the new ones:N98N169N214N283N630N991N1090N1155N1186N1558 log:here
-
BTW, i have just unistall Repetier Server from control panel, but issue still there.
-
it is a copy from the host window, let me do another test and send you the log file.
-
for some reason on the N commands i noticed the pause, there is a missing command, when ever it stops either 2 commands before the pause or after the pause is a missing consecutive N command.....
-
it is too long would yo rather a link to it? an image? or how can i submit a txt?here: Issue
-
Here is the run i made with Repetier 1.5.3 Slc3r 1.1.7Its a stl to big to let it finish, but the issue of the pausing is present at the very begging. I have some of the commands where it stops, i could not assure that are specific on those commands …